AIIE-2025 Journal of Physics: Conference Series 3199 (2026) 012006
IOP Publishing doi:10.1088/1742-6596/3199/1/012006
Figure 4. Intelligent Control Process of Web Tension in the Winding Section of High-Speed Paper Machine.
Figure 5. Web Tension Control Results of the Winding Section of High-Speed Paper Machine.
3. Testing To verify whether the optimized intelligent control method for web tension in the winding section of high-speed paper machines can achieve the expected web tension control effect, a test is designed. The initial operating parameters of high-speed paper machines are set as initial data, the control tasks and objectives are set for the web in the winding section according to paper quality requirements, and the control results are obtained through the operation of the optimized intelligent control method. 3.1. Test Object An 1880-type high-speed paper machine, which is a highly practical mainstream model in the current papermaking industry, is selected as the test object. Its design and performance are perfectly tailored to the large-scale production requirements of small to medium-sized paper mills, while balancing production capacity, product flexibility, and cost control. The linear speed of the winding section is 200 m/min, and the width and thickness of the paper are 0.8 m and 0.04 mm, respectively. 3.2. Generating Web Tension Control Tasks for the Winding Section of a High-Speed Paper Machine The quantity of production materials is determined and input into the high-speed paper machine, the initial operating parameters are set, and the web tension control targets are set for the winding section according to papermaking quality requirements to generate web tension control tasks for the winding section. The generation results of some control tasks are shown in Table 1. Table 1. Web Tension Control Task Table for the Winding Section of High-Speed Paper Machine. Control Task No. Initial Web Tension / N Web Tension Control Target / N Web Tension Control Quantity / N 1 40 58 18 2 40 55 15 3 40 20 4 40 45 5 5 40 48 8 The generation results of other web tension control tasks in the test can be obtained in the above manner. To ensure the reliability of the test results, the number of generated control tasks is required to be no less than 300. 3.3. Describing the Control Effect Test Process To meet the operational requirements of the algorithm, a controller device is installed inside the high- speed paper machine, followed by commissioning of the controller. First, the correctness of the input
4
Made with FlippingBook Online newsletter maker