PAPERmaking! Vol12 Nr2 2026

AIIE-2025 Journal of Physics: Conference Series 3199 (2026) 012006

IOP Publishing doi:10.1088/1742-6596/3199/1/012006

values of the controller’s parameters (such as gain, integral time, and derivative time) is verified. Then, the controller is connected to the high-speed paper machine, minor adjustments are made to the controller’s operating parameters, and the response of the high-speed paper machine is observed to determine the optimal control parameters. The winding section of the high-speed paper machine is connected to the web tension control program, the web tension control tasks and targets are input, and the control results are obtained, as shown in Figure 5. 3.4. Setting Control Effect Test Indicators The web tension control error in the winding section of the high-speed paper machine is set as a quantitative test indicator to reflect the control effect. The calculation formula for this indicator is: (9) )ႋೈஙJ೉ႋDQG)Fೊႈႋஙೊႆ respectively represent the tension control target and the control result. A smaller calculated web tension control error indicates a better control effect of the corresponding method. 3.5. Test Results and Analysis 3.5.1. Web Tension Control Effect Under Ideal Working Conditions target control F F H  Under ideal working conditions, the test results of the intelligent web tension control effect in the winding section of the high-speed paper machine are obtained through statistical analysis of relevant data, as shown in Table 2. Table 2. Test Data Table of Intelligent Web Tension Control Effect Under Ideal Working Conditions.

Web Tension Under Adaptive Backstepping-Based Tension Control / N

Control Task No.

Web Tension Under Genetic ADRC-Based Tension Control / N

Web Tension Under Intelligent Control / N

1 2 3 4 5

  78 47 54

  73  55

 53 71 45 55

Substituting the data in Table 2 into Formula (9), the average web tension control errors of the three methods are calculated to be 4.8 N, 2.28 N, and 0.50 N, respectively. 3.5.2. Web Tension Control Effect Under Interference Working Condition Activate the interference source device in the test environment. Under the interference working condition, collect the web tension control result data to obtain the control results under the interference working condition, as shown in Table 3. Table 3. Test Data Table of Intelligent Web Tension Control Effect Under Interference Working Condition. Control Task No. Web Tension Under Genetic Active Disturbance Rejection-Based Tension Control Method / N Web Tension Under Adaptive Backstepping- Based Tension Control Method / N Web Tension Under Intelligent Control Method for Winding Section of High-Speed Paper Machine / N

1 2 3 4 5

79  79 49 52

74  73 48 51

73  71 45 50

5

Made with FlippingBook Online newsletter maker