PAPERmaking! Vol12 Nr2 2026

PAPER making! FROM THE PUBLISHERS OF PAPER TECHNOLOGY INTERNATIONAL ® Volume 12, Number 2, 2026

constraints, and limited scalability. These drawbacks have prompted research into alternative solutions for sludge resource utilization. In this study, sludge cakes produced via catalytic wet air oxidation (CWAO) were applied in the papermaking process to replace conventional inorganic fillers. Results : Waterworks sludge (WS) and civil sludge (CS) were found to have the lowest effect on enhancing the tensile strength of the paper, while kitchen waste sludge (KS), paper sludge (PS), and post-membrane thickened liquid sludge (MS) showed superior improvement in tensile strength thanks to their organic composition. The integration of cationic etherified starch (CES) with the three aforementioned sludge types enhanced the tensile strength, with the utmost strength reaching 0.358 kN/m at 3 wt.% CES and 30 wt.% PS. According to SEM characterization, the inorganic components in the fillers filled the voids among the fibers, while the organic components acted as connection links between the fibers and fillers. Conclusion : This is the first study that provides a comprehensive guide for replacing conventional inorganic fillers with CWAO-treated sludge, supported by CES additive, to facilitate resource valorization and cost reduction in the papermaking industry. Despite multiple benefits related to lowering the consumption of conventional fillers and reduced sludge handling costs, this approach is only appropriate for end-use applications that do not involve direct contact with food or medicine, and the addition of CWAO-treated sludge and CES must be determined according to the required tensile strength. “ Evaluation of Papermaking Applicability of Organic Fillers Derived from Pruned Apple and Pear Branches ” , Su Wan Hong & Jin Ho Seo, Journal of Korea TAPPI , 30 April 2026, 88-96. Substantial amounts of agricultural by-products are generated annually, however, much of this biomass is still disposed of through incineration rather than material valorization. In this study, organic fillers derived from pruned apple and pear branches were produced via a ball-milling process to investigate their feasibility as alternative fillers for papermaking. The resulting spherical organic particles exhibited an average particle size of 9.67µm, along with higher lignin and extractive contents compared to wood powder, and displayed a negatively charged surface (-13.7mV). Handsheets containing the organic fillers showed increases of approximately 20% in compressive strength and 18% in bending stiffness under optimized conditions relative to the control. Notably, the combined use of the fillers with a retention aid further enhanced the retention rate of fine particles, leading to a 34% increase in bending stiffness compared with handsheets with 10% filler alone. Overall, these findings demonstrate that fruit-tree pruning residues can be converted into functional organic fillers with promising applicability as sustainable alternatives in papermaking processes. “ Influence of cationic polyacrylamide molecular weight on the retention of mixed talc and ground calcium carbonate fillers of different particle sizes ” , Mi Hee Lee, Kyoung Hwa Choi, Kwang Seob Lee, Bruno Carré & Jeong Yong Ryu, Journal of Wood Science , published online 9 June 2026. This study investigated the relationship between cationic polyacrylamide (C-PAM) molecular weight and inorganic filler particle size in paper retention, using the Wet End Process Simulator to replicate industrial sheet forming under vacuum dewatering and vibration. Stocks containing larger-particle talc exhibited greater flocculation and poorer formation than those with smaller-particle ground calcium carbonate (GCC), with formation further deteriorating as C-PAM molecular weight increased from 6 to 8 × 10 6 . The reduced specific surface area of talc limited polymer adsorption, leaving excess C-PAM to promote fiber flocculation. This result demonstrates that the number of polymer electrolytes can be either insufficient or excessive depending on the available adsorption surface area, and that the retention of small-sized fillers with a large specific surface area

Page 5 of 13

Technical Abstracts

Made with FlippingBook Online newsletter maker