12
J Renew Mater. 2025
respiratory tract, while also reducing visibility and obstructing evacuation routes during fire events, thereby increasing life safety risks. In this study, TSR values for EPW biocomposites ranged from 5 m 2 ⋅ m − 2 (EPW1 and EPW3) to 12 m 2 ⋅ m − 2 (EPW2) (Table 3). Although EPW2 exhibited the highest average smoke release, the differences among compositions were not statistically significant. By contrast, rigid polyurethane foam has reported TSR values between 400 and 990 m 2 ⋅ m − 2 [71], which corresponds to values nearly 100 times higher than those of EPW composites. Thus, EPW biocomposites represent a promising bio-based alternative to conventional synthetic materials, offering substantially lower smoke toxicity during combustion. 4 Conclusions The properties of EPW mycelium biocomposites can be effectively tailored through the selection of both primary and co-substrates. The inclusion of hemp and sawdust co-substrates significantly influenced the mechanical, thermal, and fire performance characteristics. EPW1 biocomposites, composed solely of egg packaging waste, exhibited a balanced combination of mechanical, thermal, and fire performance properties relative to EPW2 and EPW3 combinations containing hemp or sawdust co-substrates. Enhanced fire performance of EPW1, characterized by prolonged time to ignition, lower total heat release, and reduced smoke emission, highlights its potential as a fire-retardant alternative to conventional synthetic materials for building insulation. EPW1 composites, with the highest density and flexural strength, are appropriate for structural or load-bearing applications. Lower hygro- scopicity of EPW1 contributes to the suitability of the composites in environments with variable moisture exposure, such as packaging and interior panels in humid climates. Among the three formulations, EPW2 with hemp shives exhibited enhanced compressive strength, the lowest density, and thermal conductivity, making it the most suitable for thermal insulation or packaging applications where lightweight materials are preferred. EPW3 showed intermediate values and may serve as a versatile option for general-purpose biocomposites. This formulation-dependent property variation demonstrates the potential to tailor EPW mycelium composites for specific end uses through controlled substrate processing. Egg packaging waste can be considered a promising substrate for inclusion in mycelium-based composites, as it did not inhibit fungal colonization despite the presence of a high content of non-fibrous impurities and synthetic wet- strength resins. Supplementation with wheat bran was essential for successful fungal colonization of the EPW substrate. Acknowledgement: The authors thank the Latvian State Institute of Wood Chemistry for support by providing scien- tific infrastructure for this research. We are grateful to Dr. Mikelis Kirpluks for the processing of cone calorimetry data. Funding Statement: This research was funded by the Latvian Research Council FLPP project No. lzp-2023/1-0633 “Innovative mycelium biocomposites (MB) from plant residual biomass with enhanced properties for sustainable solutions”. Author Contributions: The authors confirm contribution to the paper as follows: Conceptualization, Ilze Irbe, Inese Filipova; methodology, Laura Andze; investigation, Ilze Irbe; resources, Inese Filipova, Laura Andze; writing—original draft preparation, Ilze Irbe; writing—review and editing, Inese Filipova, Laura Andze; project administration, Inese Filipova; funding acquisition, Ilze Irbe. All authors reviewed the results and approved the final version of the manuscript. Availability of Data and Materials: The data that support the findings of this study are available from the Correspond- ing Author, upon reasonable request. Ethics Approval: The article contains no studies involving human or animal subjects. Conflicts of Interest: The authors declare no conflicts of interest to report regarding the present study.
Made with FlippingBook Online newsletter maker