THE REV ® SYSTEM
FOR CNC MILLING MACHINES
FOR A CORRECT SET-UP OF THE REV'S HOLDERS ON THE MILLING CENTERS, IT'S SUGGESTED THE USE OF THE ALIGMENT PLATE. It is a calibrated bar that needs to be assembled in place of the insert, with a centesimal dial gauge sliding along it (or millesimal, if greater precision is required). When the tool has been centred in relation to the reference axes of the workpiece, the cutting tool can be re-assembled and processing can begin.
CNC MILLING MACHINE USE Assemble the tool directly on a Weldon fitting (we recommend one with an internal coolant). Enter in MDI interface and set the machine in the spindle configuration (far example Fanuc M19). House the aligner plate in the insert housing and, using a gauge or comparator, slide the axis along the flat surface of the plate untiI you achieve perfect alignment, parallel to the direction of operation. Tighten the bolts on the Weldon fitting so as to clamp the tool on, then remove the aligner plate and house the insert. SUGGESTION: Do not refer to the milled surfaces on the tool shank. Fix using the grub screws on the cylindrical part of the shank.
CNC PROGRAMMINGS
THE REV ® SYSTEM
The REV ® Broaching Tool technicians have developed CNC programmes far tool operation. These are provided free of charge on customer demand through access to the reserved area of our website. They are developed far the most common types of CNC contrai currently available on the market.
Using these programs it is very easy for the operator to process simple keyway and conical internal gears, quickly and efficiently.
11
www.revtool.eu
THE REV ® SYSTEM
GENERAL CATALOGUE 2026
Made with FlippingBook - Online Brochure Maker