THE REV ® SYSTEM
FOR SLOTTERS
The REV ® System can be used, in addition to CNC machining centres and lathes, also on traditional machines such as slotting and shaping machines, offering great sturdiness and versatile use, unlike tools commonly used on these machines. To clamp the tool to slotting and shaping machines, the REV ® system offers an adapter (square or prismatic) that makes it possible to process the hole in four positions angled wtih 90°. The REV ® adapter is made with 18NCD5 which, through
tempering, reaches a hardness of 58/60 HRC. The toughness and rigidity of this material make it possible to achieve processing with an excellent surface finish. The adapter (square or prismatic) is equipped with two threaded holes where the two M12x8 flat point grub screws are inserted and used to clamp the tool to the inside of the adapter. The timing pin guarantees a perfect position of the tool in relation to the work axis. The solution with the square or prismatic adapter is only one of the multriples possibilities that REV ® is able to provide to use the holders on the slotting machines. REV ® technicians are able to adapt the tool to all slotting and shaping machines on the market, providing special solutions of clamping.
ASSEMBLY ON SLOTTERS
House the insert in the tool and clamp in on by tightening the Torx screw with the screwdriver.
Put in the tool inside the square or prismatic adapter and fix it using the flat point grub screws.
Attach the square or prismatic adapter to the slotting or shaping machine.
12
GENERAL CATALOGUE 2026
THE REV ® SYSTEM
www.revtool.eu
Made with FlippingBook - Online Brochure Maker