Technical training
Service Lift Training Standard / V5 02052025
c.
Inspection (condition and tension)
Provide individual feedback to participants on their performance
The participants shall:
Engage in practice, share experiences, and apply the received feedback in following exercises. The practical training should include:
a. Installation of the guide ropes, including the coiling-up or cut
b.
Inspection of labels on guide ropes
c. Visual inspection of the guide ropes according to manuals
d. Examine guide ropes and recognise when these are in flawless condition (e.g., diameter, broken threads, wear, and corrosion) at the lowest landing
e. Inspection and adjustment of the guide ropes tension
f.
Adjust guide ropes tension to the specified value
g. Visual inspection of the condition of the coiled-up of rope ends of the guide wires
h. Installation of the wire rope fixings and an adjustment of the wire ropes at the landings
i. Visual inspection of the wire rope fixings at the landings
ELEMENT 6.3 - WHEELS AND ROLLER GUIDE UNIT
Learning objectives:
36) The participants can take initiative and take responsibility to install, inspect and replace guide wheels and a roller guide unit when needed in accordance with the manual (Ability, intermediate level)
The instructor shall:
Present and explain examples of roller guide units in both flawless and damaged conditions
Present examples of guide wheels and demonstrate how to inspect the guide wheels
Facilitate practical training on installing and inspecting roller guide units
Global Wind Organisation ©2025 / www.globalwindsafety.org
124 / 170
Made with FlippingBook flipbook maker