Technical training
Service Lift Training Standard / V5 02052025
Discuss key points in the procedures of replacing components
ELEMENT 10.4 - FORMATIVE POST-EVALUATION
The participants shall:
Conduct a short questionnaire test to recap the theory and safety issues from Lesson 10
Check own answers and solutions from the shown fact list on completion of the test
SUSPENSION SYSTEMS
35 min.
The aim of this lesson is to enable the participants to ensure the safe condition of the suspension system in accordance with the manual.
After successfully having completed Lesson 11 of the Service Lift Installation, Inspection and Repair Module, the participants can:
62) Take responsibility for assessing the condition of the suspension system, seek guidance in lift manuals and directives, and decide relevant and responsible action in case of defects and damages, including reporting (Ability, intermediate level)
ELEMENT 11.1 - SUSPENSION CROSSBEAM
Learning objective:
63) The participants can explain how to do a visual inspection of all parts and welds for damage, cracks, corrosion of the suspension system and its crossbeam (Knowledge, intermediate level)
The instructor shall:
Explain the importance of a flawless suspension system and crossbeam, and present examples of damage, cracks, and corrosion in connection to the suspension system and crossbeam and its welds
Distribute images of examples of damages, cracks and corrosion on suspension systems and crossbeams to the participants and facilitate discussions in pairs on damage, cracks and corrosion and what actions to take, if such are discovered. Each pair should discuss one image for one minute, and then swap the images amongst the participants to initiate discussions on each new image in turn
Global Wind Organisation ©2025 / www.globalwindsafety.org
135 / 170
Made with FlippingBook flipbook maker