Technical training
Service Lift Training Standard / V4
Check own answers and solutions from the shown fact list on completion of the test
SUSPENSION SYSTEMS
35 min.
The aim of this lesson is to enable the participants to ensure the safe condition of the suspension system in accordance with the manual.
After successfully having completed Lesson 11 of the Service Lift Installation, Inspection and Repair Module:
62) The participants can take responsibility for assessing the condition of the suspension system, seek guidance in lift manuals and directives, and decide relevant and responsible action in case of defects and damages, including reporting (Ability, intermediate level)
ELEMENT 11.1 - SUSPENSION CROSSBEAM
Learning objective:
63) The participants can explain how to do a visual inspection of all parts and welds for damage, cracks, corrosion of the suspension system and its crossbeam (Knowledge, intermediate level)
The instructor shall:
Explain the importance of a flawless suspension system and crossbeam, and present examples of damage, cracks, and corrosion in connection to the suspension system and crossbeam and its welds
Distribute images of examples of damages, cracks and corrosion on suspension systems and crossbeams to the participants and facilitate discussions in pairs on damage, cracks and corrosion and what actions to take, if such are discovered. Each pair should discuss one image for one minute, and then swap the images amongst the participants to initiate discussions on each new image in turn
The participants shall:
Engage in pairs in discussions inspired by distributed images and share their experiences on damages, cracks, and corrosion in connection to the suspension systems and crossbeam and its welds
The participants’ experience will be enhanced by real life examples on damaged components
Note
Global Wind Organisation ©2024 / www.globalwindsafety.org
136 / 166
Made with FlippingBook flipbook maker