Technical training
Service Lift Training Standard / V5 02052025
The instructor shall:
Present and demonstrate examples of how to do a visual inspection of all bolts and bolted connections for completeness and tightness
Lead or facilitate discussion on bolts and bolt connections completeness and tightness, and about the required competencies for tightening bolts in a WTG
The participants shall:
Engage in discussions and share experiences on bolt and bolted connections completeness and tightness, and how to inspect and tighten them in accordance with the relevant manual
ELEMENT 11.4 - UPPER AND LOWER ATTACK PINION (RACK AND PINION)
Learning objective:
66) The participants can describe how to do a visual inspection and replacement of the upper and lower attack pinion according to the relevant manual (Knowledge, basic level)
The instructor shall:
Present and demonstrate examples of how to do a visual inspection of all bolts and bolt connections for completeness and tightness on the upper and lower attack pinion
Present procedures or principles for replacement of pinions in accordance with manuals
Lead or facilitate a discussion on bolts and bolt connections and their completeness and tightness, and on replacing pinions
The participants shall:
Engage in discussions about inspection and replacement of upper and lower attack pinion according to bolt and bolt connections on the upper and lower attack pinion, and their completeness and tightness
Global Wind Organisation ©2025 / www.globalwindsafety.org
137 / 170
Made with FlippingBook flipbook maker