Technical training
Service Lift Training Standard / V4
5.2 Target Group The target group for the Service Lift User Module training is personnel working on WTGs within the wind industry where the use of lifts is required for transportation of personnel and equipment inside the WTG. The target group for the Service Lift Inspection and Maintenance Module training is personnel working on WTGs within the wind industry who inspect the functioning of lifts. These inspections cover both initial inspections for the purpose of commissioning the lift, general required inspections, and inspections after replacement of main components.
Maintenance and subsequent inspection personnel choices must be aligned with any need for independence included in relevant, local legislation
Note
The target group for the Service Lift Installation, Inspection and Repair Module training is personnel working on WTGs within the wind industry by installing, inspecting, maintaining, commissioning, and repairing lifts in a WTG. 5.3 Validity Period The Service Lift Training Standard modules are enduring qualifications and therefore a validity period does not apply to these trainings. This assumes that the participant is actively working with the use, inspection, installation, and maintenance respectively of lifts.
5.4 Aims and Objectives
Training in accordance with this standard is aiming at ensuring the safety of personnel and the safe use of the equipment.
The Service Lift User Module is aimed at the safe and correct use of a lift within a WTG.
The Service Lift Inspection and Maintenance Module is aimed at ensuring the readiness of a lift in a WTG. This is achieved by; first, inspecting and maintaining the lift plant by initial inspections for the purpose of commissioning the lift; secondly, required general inspections; and finally, inspections after replacement of main components. Content and learning objectives from the Service Lift Inspection and Maintenance Module are also included in the Service Lift Installation, Inspection and Repair Module curriculum.
The Service Lift Installation, Inspection and Repair Module is aimed at performing installation and repair, commissioning, inspection, and maintenance work on a lift in a WTG.
These aims are fulfilled when the participants possess the required knowledge, skills, and abilities to conduct assigned tasks and operations in a lift safely and efficiently.
To achieve the aims and objectives of the modules it is imperative for the manuals and guides to be at hand, and used, at all times.
Note
Global Wind Organisation ©2024 / www.globalwindsafety.org
14 / 166
Made with FlippingBook flipbook maker