Technical training
Lift Standard / V3 2023-05-02
The aim of this lesson is to enable the participants to install, inspect and test the function of the fall arrest device (FAD) in accordance with the relevant manuals and inspection lists After successfully having completed Lesson 15 of the Lift Commission, Inspection, Installation and Maintenance Module: 154) The participants can take responsibility for installing and function testing the fall arrest device (FAD) as described in the relevant manuals (Ability, intermediate level)
ELEMENT 15.1 - LABELS AND TYPE PLATES
Learning objectives:
155) The participants can explain how to do a visual inspection of labels and type plates to the FAD as described in the relevant manuals (Knowledge, intermediate level)
156) The participants can explain how to apply labels to the FAD (Knowledge, intermediate level)
The instructor shall:
Present examples of labels and type plates to FADs from relevant manuals
Demonstrate how to apply labels to FADs
Lead or facilitate a discussion on how and what to inspect in relation to labels and type plates in relation to FADs
The participants shall:
Engage in discussions and share experiences on how and what to inspect in relation to labels and type plates on FADs – and how to apply labels
ELEMENT 15.2 - GENERAL CONDITION
Learning objectives:
157) The participants can perform an installation of a fall arrest device, following the relevant manuals (Skills, intermediate level)
Global Wind Organisation©2023 / www.globalwindsafety.org
142 / 171
Made with FlippingBook flipbook maker