Technical training
Lift Standard / V3 2023-05-02
ANNEX 1 - EQUIPMENT LIST
The following pages contain the lists of equipment required for delivering the lift training standard.
All equipment shall be maintained and where appropriate, inspected and tested in accordance with current national standards/ legislation and manufacturers’ recommendations.
Note
The equipment required for training must be available and must fulfil national legal requirements where applicable. The following tools, materials and equipment are needed for the execution of the course:
Training facility:
a.
Lift, lift mock-up or lift simulator requirements in detail.
a.i Functional lift setup including:
a.ii travelling distance must allow for test, inspection and work on relevant top and bottom obstruction devices and other relevant safety devices, mechanical devices and rescue systems as stated in the relevant lift manual. a.iii gate/fence with original lock system. Additional mechanical and electrical lock systems must be visualised in illustrations. a.iv tools, as needed, for the daily inspection, commission inspection, pre-assembly/installation, and maintenance of lifts.
b.
Documents
b.i relevant operation/user manuals, maintenance manuals, installation manuals and inspection manuals to ensure, that wire guided, ladder guided, and rack and pinion systems are included in the training.
b.ii example of daily inspection sheet.
b.iii example of logbook.
c. Show and tell parts or visuals from relevant manufacturers covering wire/rope guided, ladder guided and rack and pinion lift systems other that the functional training lift. To include:
c.i
hoist.
c.ii electro-mechanical brakes and the centrifugal brakes.
c.iii safety brake systems.
c.iv obstruction systems etc.
c.v Bowden cable installation to practise adjustments.
Global Wind Organisation©2023 / www.globalwindsafety.org
149 / 171
Made with FlippingBook flipbook maker