Technical training
Service Lift Training Standard / V4
Lead or facilitate a discussion on differences between different fall arrest devices in different lift types
The participants shall:
Engage in the practical training, reflect on the received feedback, and take active part in discussions and share experiences from working with fall arrest devices
SUPPLY CABLE
20 min.
The aim of this lesson is to enable the participants to install and inspect the supply cable and cable bin in accordance with the manuals and inspection lists.
After successfully having completed Lesson 16 of the Service Lift Installation, Inspection and Repair Module:
92) The participants can take responsibility of installing and inspecting a supply cable and cable bin as described in the manuals (Ability, intermediate level)
ELEMENT 16.1 - FEED IN OF SUPPLY CABLE
Learning objective:
93) The participants can perform an inspection and an installation of the feed in of a supply cable following relevant instructions and manuals (Skills, intermediate level)
The instructor shall:
Facilitate practical training on inspecting, installing, or replacing feed in of a supply cable and provide feedback to the participants on their performance
Lead or facilitate discussion on safety issues in relation to inspecting and re-installing feed in of a supply cable
The participants shall:
Engage in the practical training on inspecting, installing, or replacing, reflect on the received feedback, and take active part in discussions and share experiences from working with feed in of a supply cable
Global Wind Organisation ©2024 / www.globalwindsafety.org
152 / 166
Made with FlippingBook flipbook maker