Technical training
Service Lift Training Standard / V4
b.
Wire/cable guiding
c.
Rack and pinion
Facilitate group discussions on:
a.
Functionalities of lifts in WTG
b. Opening doors in normal and emergency situations
c.
Restrictions for using lifts during fire in the WTG
Provide constructive feedback to the participants about their engagement and understandings
The participants shall:
Engage in group discussions and share experiences on the use of different types of lifts, including:
a. The risks of entering the area where the lift is landing in its lowest position
b. Why and how to respect safety distances in the work area, including danger zone
c. Risks from leaving the lift at positions other than the prescribed points
d.
Function of the safety brake
e.
Safety function of overspeed system
f.
Standard rescue concept template
g. Special conditions and restrictions in connection with use of lifts during fire in the WTG
Suggestion. In small groups, each group discusses their allocated topic, prepares a short presentation and presents their key (learning) points in plenum
Note
INSPECTION OF LIFT PRIOR TO USE
25 min.
The aim of this lesson is to enable the participants to ensure their own safety when using lifts and to understand the necessity of following checklists and seeking guidance when needed. The lesson will cover different lift types and systems.
After successfully having completed this lesson of the Service Lift User Module training, the participants can:
Global Wind Organisation ©2024 / www.globalwindsafety.org
32 / 166
Made with FlippingBook flipbook maker