Technical training
Lift Standard / V3 2023-05-02
Point out examples of restricted spaces, slippery surfaces, and proper housekeeping
Lead or facilitate discussion and ask for participants’ experiences on restricted spaces, slippery surfaces, and proper housekeeping in relation to lifts in WTGs
The participants shall:
Engage in discussions and share experiences on the topic
Conduct a short questionnaire test to recap on the theory and safety issues from Lesson 3
Check own answers and solutions from the shown fact list on completion of the test
The ability to take necessary safety precautions when using and working on lifts in a WTG must be practised during all practical training elements in this module when relevant
Note
GATES AND FENCES
15 min.
The aim of this lesson is to enable the participants to inspect and ensure the free movement of the gates and fences in the WTG.
After having successfully completed Lesson 4 of the Lift Commission and Inspection Module, the participants can:
27) Explain the principles of free movement of mechanical parts in gates and fences outside a lift (Knowledge, intermediate level)
ELEMENT 4.1 - OUTSIDE THE LIFT
Learning objective:
28) The participants can take responsibility of the free movement of mechanical parts in lift gates and fences (Ability, basic level)
The instructor shall:
Present and demonstrate examples of movement of mechanical parts in lift gates and fences
Lead or facilitate discussion on possible changes to the free movement of mechanical parts in lift gates and fences
Global Wind Organisation©2023 / www.globalwindsafety.org
56 / 171
Made with FlippingBook flipbook maker