Technical training
Lift Standard / V3 2023-05-02
Check own answers and solutions from the shown fact list on completion of the test
DRIVE AND SAFETY WIRE ROPE AND RACK
40 min.
The aim of this lesson is to enable the participants to test and ensure the functionality of drive and safety ropes and racks in accordance with the relevant manuals and inspection lists.
After successfully having completed Lesson 12 of the Lift Commission and Inspection Module:
91) The participants can take responsibility to do a visual inspection of drive and safety ropes according to ISO 4309 (Ability, intermediate level)
ELEMENT 12.1 - DRIVE ROPES, IN GENERAL
Learning objective:
92) The participants can perform a visual inspection of the diameter of drive rope and safety rope in unloaded state at three points: bottom, middle and top (Skills, intermediate level)
The instructor shall:
Demonstrate how to inspect drive and safety ropes
Facilitate practical training on inspecting drive and safety ropes
Provide feedback to the participants on their performance during the practical training
The participants shall:
Engage in practice, share experiences, and apply the received feedback in following exercises
ELEMENT 12.2 - TENSION WEIGHT
Learning objectives:
Global Wind Organisation©2023 / www.globalwindsafety.org
76 / 171
Made with FlippingBook flipbook maker