Technical training
Service Lift Training Standard / V4
ELEMENT 9.4 - FORMATIVE POST-EVALUATION
The participants shall:
Conduct a short questionnaire test to recap the theory and safety issues from Lesson 9
Check own answers and solutions from the shown fact list on completion of the test
LIFT OPERATION PANEL
15 min.
The aim of this lesson is to enable the participants to verify and ensure that the lift operation panel is fully operational.
After successfully having completed Lesson 10 of the Service Lift Inspection and Maintenance Module:
62) The participants will, on their own, take responsibility for inspecting the lift operation panel and request repair when needed according to the manual (Ability, intermediate level)
ELEMENT 10.1 - THE LIFT OPERATION PANEL
Learning objective:
63) The participants can take responsibility to carry out a function test of the operation panel including emergency stop; reset/ready inside/outside; selector switch; up/down inside/outside, and to request repair when required (Ability, intermediate level)
The instructor shall:
Present examples of operation panels in and outside lifts as well as at the lift base of the WTG and at the nacelle
Facilitate training in function testing operation panels
Lead or facilitate a discussion on the lift operation panel and about how and when repair is required
The participants shall:
Global Wind Organisation ©2024 / www.globalwindsafety.org
80 / 166
Made with FlippingBook flipbook maker