Technical training
Service Lift Training Standard / V4
and what actions to take, if such are discovered. Each pair should discuss one image for one minute, and then swap the images amongst the participants to initiate discussions on each new image in turn
The participants shall:
Engage in pairs in discussions inspired by distributed images and share their experiences on damages, cracks, and corrosion in connection to the suspension systems and crossbeam and its welds
The participants experience will be enhanced by real life examples of damaged components
Note
ELEMENT 11.2 - ROPE END ATTACHMENTS
Learning objective:
68) The participants can explain how to do a visual inspection of the rope end attachments according to the manual (Knowledge, intermediate level)
The instructor shall:
Present examples of rope end attachments to e.g. the crossbeam, foundation, and tensioning system
Lead or facilitate discussion on rope ends attachments
The participants shall:
Engage in discussions and share experiences on rope ends attachments and how to inspect these
ELEMENT 11.3 - BOLTS AND BOLTED CONNECTIONS
Learning objective:
69) The participants can explain how to do a visual inspection of all bolts and bolted connections for completeness and tightness (Knowledge, intermediate level)
The instructor shall:
Global Wind Organisation ©2024 / www.globalwindsafety.org
83 / 166
Made with FlippingBook flipbook maker