Technical training
Service Lift Training Standard / V4
The training standard Scope - Key task that are covered in the individual modules are added to the scope
5.4. Aims and objectives for the training standard have been unfolded to clarify the tasks linked to the three modules respectively
Module 1, Service Lift User Module (SLU)
Lesson 1, Introduction
Element 1.6. While touching upon motivation, the participants should share their reasons for attending the training
Element 1.7.2 Safety of offshore operations changed to safety of wind industry operations
Lesson 2, Lesson name extended to Legislation and manuals
Aim adjusted from Comply to Understand the necessity of always following
Two new overall learning objectives for the lesson: Take initiative to follow legislation; describe general functionalities of a lift
Lesson 4, Inspection of lift prior to use
The wordings of the lesson aim and overall learning objective are changed to focus on the user's safety and understand the necessity of following check list and follow guidance
Element 4.2. learning objective changed from Ability to knowledge, basic level
Element 4.5 renamed from Inspection to Pre-use Inspection to clarify that the topic is pre-use inspection
Lesson 5, Operation of lift
Element 5.3 and 5.4 - Safety in danger zone and in the lift travel range is in focus through-out the practical exercises Element 5.11 - the reference to evacuation in 5.11.2 is deleted. Evacuation and emergency descend are not related activities
Lesson 6, Evacuation from lift
The lesson aim is changed from preparation to evacuate to preparation for site specific evacuation training. The learning objective is unchanged
Lesson 7, Lift in parking position, general
The lesson aim is unfolded for clarity; the overall learning objective is unchanged
Module 2, Service Lift Inspection and Maintenance module (SLIM)
Global Wind Organisation ©2024 / www.globalwindsafety.org
9 / 166
Made with FlippingBook flipbook maker