Technical training
Service Lift Training Standard / V5 02052025
95) The participants can perform a visual inspection of the drive unit attachment to the lift (Skills, intermediate level)
96) The participants can perform an inspection of a drive unit according to relevant manuals and guides (Skills, intermediate level
The instructor shall:
Demonstrate examples of:
a. How to inspect the attachment of the drive unit to the lift
b.
How to do a wear test of centrifugal brake
c. How to check the operation of motor break at top- and bottom-drive unit
d. How to do a speed test during emergency descent
e. How to do a visual inspection for leaks on drive unit and report in case of leaks
Facilitate practical training on:
a.
How to do a wear test of the brake system
b. How to inspect for wear on the drive unit, e.g. pulley, gear-teeth, sheaves, and the divertor including replacing the divertor when needed in according to the manual
c. How to do a speed test during emergency descent
The participants shall:
Engage in the practical training on:
a.
visual inspection of drive units
b.
wear test on brake systems and drive units
Share experiences on hoist and drive units, and apply the received feedback in following learning activities
Global Wind Organisation ©2025 / www.globalwindsafety.org
92 / 170
Made with FlippingBook flipbook maker