PAPERmaking! Vol12 Nr2 2026

Coatings 2026 , 16 , 299

3of 25

board coating [33]. In addition to blade coating, numerous other coating techniques have been developed, and are described elsewhere [6,34–44]. Each of these coating techniques has been further modified to a variety of designs. Spreading and casting coating methods are widely used at the laboratory-scale development of renewable packaging materials [45]. The present study investigates how drying parameters influence the barrier properties of high-speed coated paperboard. The chosen coating techniques illustrate the application of rod and polymer tip metering methods. A multilayer coating approach analogous to those previously described by Emilsson et al. [46] and Christophliemk et al. [47] was employed. Drying has been identified as a critical unit operation in the application of barrier coating from aqueous solutions and dispersions [6,48]. Although drying has a significant influence on the barrier properties of high-speed coated paperboard, relatively few studies have examined this subject in detail. Heilmann [48] proposed that an optimal drying strategy for functional coatings, including barrier coatings, requires appropriate evaporation rates together with effective heating of the substrate beneath the coating and the initial sedimentation layer. Proper evaporation rates relative to infrared (IR) energy transfer are essential to prevent premature film formation at the surface, which can lead to micro-blistering. Guezennec [49] reported blister defects in dry coatings during pilot trials at 70mmin − 1 using electric IR combined with hot-air drying using a 17% PVOH solution. However, when microfibrillated cellulose (MFC) was added to the PVOH solution, the resulting PVOH-MFC suspension exhibited no observable blistering. This phenomenon was attributed to differences in water evaporation behaviour during drying. The coating formulation used in the present study served as a model dispersion for analysing the coating and drying processes. The coating consisted of bentonite dispersed in an aqueous starch solution plasticised with poly(ethylene glycol) (PEG), reflecting the longstanding utilisation of starch/bentonite dispersions within the paper industry. Optimisation of the starch/bentonite formulation with respect to barrier performance lies beyond the scope of the present study. It is important to recognise the historical use of bentonite–starch suspensions as a precoating layer in the industrial coating of paper and paperboard. This initial precoating step was implemented to establish a primary barrier layer on the substrate surface before subsequent coating operations, which included a conventional precoat formulation (often containing calcium carbonate) followed by a top- coat [50]. In the trials described by Weigl et al. [50], the bentonite–starch barrier layer was applied using a metered size press equipped with a grooved rod and operated at a web speed of 400 m min − 1 . Hlavatsch et al. [51] investigated the further development of barrier layers consisting of starch and bentonite. A recent review of nano materials in smart and active food packaging has been presented by Patra et al. [52]. Pure starch films are brittle; however, the incorporation of plasticisers such as glycerol markedly reduces tensile stress and increases strain at rupture [53]. Poly(ethylene glycol) (PEG) is utilised as an alternative plasticiser for starch, and its effects have been described elsewhere [54–57]. To reduce gas and water vapour permeability as well as water uptake, attempts have been made over the last 20 years to coat paper and paperboard for packaging applications with aqueous starch–bentonite (montmorillonite) dispersions [58–62]. The microstructures of starch–bentonite–plasticiser films have been examined in several stud- ies [63–68]. For a range of different bentonite clays, starches and plasticisers, Breen et al. [63] investigated structural changes in the composite layers induced by various plasticisers and the corresponding effects on barrier properties. The incorporation of PEG significantly enhanced the barrier properties of starch/bentonite coatings by reducing the water vapour transmission rate (WVTR). Interactions between bentonite and starch in the presence of plasticisers have also been documented by Reyes-Mayer et al. [64], Romo-Uribe et al. [65], Borges et al. [66], and Kumari et al. [67]. Starch chains interact with bentonite through

https://doi.org/10.3390/coatings16030299

Made with FlippingBook Online newsletter maker