PAPERmaking! Vol12 Nr2 2026

Carrejo et al. Carbon Neutrality

(2026) 5:3

Page 9 of 35

Fig. 2 Flowsheet diagram showing CO 2 point sources including in the carbon accounting for each scenario: ( 1 ) recovery boiler, ( 2 ) recovery boiler and CCS biomass boiler, ( 3 ) recovery boiler, CCS and P&P biomass boilers, ( 4 ) recovery boiler, CCS and P&P biomass boilers, and lime kiln, and ( 5 ) recovery boiler, CCS and P&P biomass boilers, lime kiln, and natural gas boiler

CO 2 emissions (kg biogenic CO 2 /yr) when that biomass is combusted with the atmospheric decay of the same quantity of fossil-based CO 2 emissions (kg fossil CO 2 /yr) through functions b(t) and f(t) respectively in the GWP bio definition (Eq. 7):

forcing resulting from a single release of a gas into the atmosphere, is calculated by integrating over time the product of the gas’s radiative efficiency (α) and the func- tion describing the fraction of that gas remaining in the atmosphere over time since its emission. In simpler terms, AGWP is the accumulated warming effect of a gas over time, determined by how strongly it traps heat and how long it stays in the atmosphere after being emitted as a pulse [39]. Cherubini et al. developed the GWP bio metric, expressed as a function of AGWP, to represent the residual atmospheric impact of biomass-derived CO ᔐ using impulse response functions (IRF) from car- bon cycle models. This metric focuses solely on CO ᔐ and does not account for non-CO ᔐ emissions such as meth- ane (CH₄) and nitrous oxide (N ᔐ O) [39]. Their meth- odology focuses on the rotation time that the biomass experienced before harvesting and allows it to sequester carbon, and compares the atmospheric decay of biogenic

 TH 0  TH 0

2 b ( t ) dt

α CO

AGWP bio AGWP fossil

(7)

GWP bio =

=

2 f ( t ) dt

α CO

where TH represents the time horizon, in this case, 100 years, to be coherent with the time horizon of the emis- sion factors used in the analysis of the previous configu- rations. The α CO2 factor is the radiative efficiency of CO 2 gas that estimates the perturbation force of certain CO 2 emissions (concentration) compared to an initial CO 2 concentration in the atmosphere [41]. The function b(t) that describes the atmospheric decay of a pulse of bio CO 2 over time is defined as follows in Eq. 8 [39]:

Made with FlippingBook Online newsletter maker