PAPERmaking! Vol12 Nr2 2026

Carrejo et al. Carbon Neutrality

(2026) 5:3

Page 18 of 35

Fig. 7 Life cycle greenhouse gas emissions associated with the standalone CCS facility (System 2), normalized by gross biogenic CO₂ captured— representing the theoretical maximum carbon removal under a narrow CDR system boundary

slightly increases removal efficiency but does not signifi- cantly alter the overall trend. Finally, a hypothetical case is shown in which the carbon stored in the paper prod- uct is assumed to be permanently retained, demonstrat- ing that product-based carbon retention could further enhance removal efficiency to 84.4%. While this scenario is not feasible under current end-of-life practices—where most paper products are either recycled, incinerated, or biodegraded [35, 51]—it could become viable in the future through emerging biomass carbon stabilization

However, once fossil fuel-derived emissions from the paper mill are included in the system boundary (nar- row cradle-to-gate), expanding CCS capacity yields noticeable gains in net carbon removal—rising from 55.4% to 72.8% as additional biogenic sources are cap- tured. The figure also includes a scenario where flue gases from the lime kiln and natural gas boiler are cap- tured. While these fossil-derived emissions do not affect the net atmospheric carbon balance under a strict CDR logic, they are included for comparison. Their inclusion

Made with FlippingBook Online newsletter maker