PAPERmaking! Vol12 Nr2 2026

Coatings 2026 , 16 , 299

7of 25

level, the peak wavelength was 1.21 μ m. The peak wavelength increased slightly with decreasing IR power—for instance, the peak wavelength was 1.35 μ mand1.73 μ mat 66% and 27% of maximum power, respectively. 2. One air turn of radius 0.4 m, not formally classified as a dryer, located between the IR dryer and airfloat dryers, where the air turn has some minor effect on the drying process. 3. Three airfloat drying hoods, each capable of operating at temperatures up to 300 ◦ C. A cooling cylinder was positioned directly after the final drying hood. The experi- mental design of the pilot trials is summarised in Table 2. Essentially, two different drying strategies were compared for multilayer coatings comprising up to six individual layers. Table 2. Summary of the coat weight drying strategy used in the pilot trials, indicating IR power, number of IR frames and temperature ( T ) in the three drying hoods. The IR power is given as a percentage of the maximum power of each active IR frame.

Number of Active IR Frames

T Drying Hood#1 ( ◦ C)

T Drying Hood#2 ( ◦ C)

T Drying Hood#3 ( ◦ C)

IRPower (%)

Number of Layers

Total (Accumulated) Coat Weight (g m − 2 )

Sample Name

Base paperboard

N/A 1

BASE

0

0

N/A

N/A

N/A

N/A

Series A—IR 20%

A1 A2 A3 A4 A5 A6

1 2 3 4 5 6 2 3 1 2 3 4 5 6

1.5 2.5 3.5 4.1 4.6 5.1 2.5 3.5 1.4 2.4

20 20 20 20 20 20 80 80 40 40 40 40 40 40

12 12 12 12 12 12 12 12 12 12 12 12 12 12

200 200 200 200 200 200 200 200

200 200 200 200 200 200 200 200

60 60 60 60 60 60 60 60 60 60 60 60 60 60

Modified Series A—IR 80%

MA2 MA3

Series B—IR 40%

B1 B2 B3 B4 B5 B6

60 60 60 60 60 60

60 60 60 60 60 60

3.05 3.70 4.30 4.75

Modified Series B—IR 40%—half of the IR frames are active

MB6

6

4.75

40

6

60

60

60

Reference thick single coating

RSA1 RSB1

1 1 1 2 1 2

5.4 5.4 3.7 6.8 3.9 7.0

80 99 55 20 80 80

12 12 12 12 12 12

250 250 200 200 200 200

250 250 200 200 200 200

60 60 60 60 60 60

Reference thick double coating

RDA1 RDA2 RDB1 RDB2

1 —N/A stands for ”not applicable”.

• Series A: Low IR power combined with high air hood temperature. • Series B: Medium IR power combined with low air hood temperature. To facilitate a more comprehensive understanding of the influence exerted by IR drying parameters, targeted modifications to both Series A and Series B were included in the experimental protocols. In parallel trials when executing Series A, the second and third layers were dried at high IR power (referred to as Modified Series A). In a parallel trial when executing Series B, drying of the sixth layer took place at reduced total IR power by turning off all six IR frames positioned on the uncoated side of the web, while keeping the power level unchanged for each remaining active IR frame (referred to as Modified Series B). In the multilayer approach, each coating layer was dried before the subsequent layer was applied. After each pass, the coated reel was transferred from the winder to the

https://doi.org/10.3390/coatings16030299

Made with FlippingBook Online newsletter maker