PAPERmaking! Vol12 Nr2 2026

J Renew Mater. 2025

9

A strong positive correlation was found between thermal conductivity and composite density ( R = 0.959, p < 0.001) (Fig. 3B). EPW2, having the lowest density, exhibited the lowest λ , while EPW1 showed the highest values for both density and conductivity. Thermal conductivity in porous biocomposites is influenced by the balance between solid and air phases. Lower-density materials tend to have a higher air content and more void spaces, which reduce the overall thermal conductivity due to air’s poor ability to conduct heat. Thermal conductivity values reported for mycelium-based composites in the literature range from 40 to 180mW ⋅ m − 1 ⋅ K − 1 . Elsacker et al. [48] evaluated MB made from flax, hemp, and straw, finding the lowest thermal conductivity (40 mW ⋅ m − 1 ⋅ K − 1 ) and moderate density (0.10 g ⋅ cm − 3 ) in hemp-based composites. In contrast, flax-based composites showed poorer insulation (60 mW ⋅ m − 1 ⋅ K − 1 ) due to higher density (0.14 g ⋅ cm − 3 ). Schritt et al. [52] developed T. versicolor MB using beech sawdust and spent mushroom substrate, reporting thermal conductivities of 63–77 mW ⋅ m − 1 ⋅ K − 1 at densities of 0.19–0.20 g ⋅ cm − 3 . These values exceed those of our birch sawdust-based EPW3 composite, which demonstrated a lower thermal conductivity of 49 mW ⋅ m − 1 ⋅ K − 1 . Holt et al. [53] developed biocomposites using Ganoderma sp. and processed cotton biomass, reporting high λ values of 100–180 mW ⋅ m − 1 ⋅ K − 1 , more than twice the highest conductivity observed in the present study. Wimmers et al. [54] tested five tree species and nine fungal strains, yielding thermal conductivities of 51–55 mW ⋅ m − 1 ⋅ K − 1 , slightly exceeding our results. The λ values of EPW biocomposites are comparable to those of conventional insulation materials such as expanded polystyrene (37 mW ⋅ m − 1 ⋅ K − 1 ), glass wool (36 mW ⋅ m − 1 ⋅ K − 1 ), and wood fiber wool (50 mW ⋅ m − 1 ⋅ K − 1 ) [55]. Given their competitive thermal performance, coupled with potentially lower production costs and embodied energy, mycelium-based insulation panels present a promising sustainable alternative to traditional materials. 3.4 Hygroscopic Sorption Moisture content of the EPW biocomposites increased significantly with rising relative humidity ( p < 0.001) (Fig. 4). EPW1 showed the lowest moisture uptake, ranging from 4.9% at 60% RH to 10.5% at 90% RH. In contrast, EPW2 and EPW3 exhibited higher values, increasing from 5.4%–5.6% to 11.7%–11.8%, respectively. Moisture content in EPW1 was significantly lower than in EPW2 and EPW3 ( p = 0.002).

Figure4: Hygroscopic sorption isotherms of EPW mycelium biocomposites. EPW: egg packaging waste; Compositions 1–3 correspond to different substrate formulations. Error bars indicate SD

Made with FlippingBook Online newsletter maker