10
J Renew Mater. 2025
RH is a critical yet often underestimated environmental factor affecting composite material perfor- mance. Moisture content of composite materials varies significantly with RH, temperature, and material composition, influencing long-term durability. It is essential that newly developed materials contribute to maintaining indoor relative humidity within the optimal range of 40%–60% [56]. Mold development typi- cally occurs at RH levels between 80%–95%, depending on temperature, exposure time, and material surface properties [57]. While some materials tolerate high RH without mold formation, others are susceptible at RH as low as 75% [58]. Water absorption studies show that solid wood absorbs the least moisture, followed by plywood, with wood composites showing the highest uptake [59]. Furniture and building industry panels such as medium-density fibreboard (MDF), particleboard, and oriented strand board (OSB) can reach 15%–20% moisture content at 97% RH [60]. In contrast, EPW biocomposites demonstrated superior performance, maintaining moisture content below 12% at 90% RH, highlighting their competitiveness as a sustainable and moisture-resistant alternative. 3.5 Reaction to Fire The cone calorimeter is a widely accepted method for evaluating the fire performance of polymer- based materials. Parameters such as moisture content, physical characteristics, and chemical composition significantly influence the flammability [61]. In this study, the fire behavior of EPW biocomposites was characterized by measuring time to ignition (TTI), time to flameout (TTF), total heat release (THR), peak heat release rate (pHRR), time to peak heat release rate (TTP), total smoke release (TSR) (Table 3), and heat release rate (HRR) (Fig. 5). Table3: Cone calorimeter results (mean ± SD) for EPW mycelium biocomposites at an irradiance of 35 kW ⋅ m − 2 (n = 4). EPW: egg packaging waste; Compositions 1–3 correspond to different substrate formulations Composition TTI (s) TTF (s) THR (MJ ⋅ m − 2 ) pHRR(kW ⋅ m − 2 ) TTP (s) TSR (m 2 ⋅ m − 2 ) EPW1 16.3 ± 3.3 594.8 ± 43.6 11.9 ± 7.7 112.4 ± 7.7 28.0 ± 2.8 5.4 ± 0.7 EPW2 10.2 ± 1.6 755.5 ± 23.5 17.7 ± 1.9 151.8 ± 3.6 21.8 ± 1.1 12.2 ± 2.1 EPW3 12.5 ± 1.7 963.5 ± 19.2 26.2 ± 3.1 164.8 ± 13.8 23.5 ± 0.6 5.4 ± 0.6
175
EPW1 EPW2 EPW3
150
125
100
75
50
25
0 120 240 360 480 600 720 840 960 1080 1200 0
Time (s)
Figure5: Heat release rate (HRR) curves of EPW mycelium biocomposites. EPW: egg packaging waste; Compositions 1–3 correspond to different substrate formulations
Made with FlippingBook Online newsletter maker