Mold Plates
242
DME Standard
Die Blocks and Plates – No. 5 Steel Available in over 300 special order sizes from 7 7 ⁄ 8 × 7 7 ⁄ 8 to 23 3 ⁄ 4 × 35 1 ⁄ 2 ; 1 3 ⁄ 8 to 11 7 ⁄ 8 thick (depending on length and width). They are supplied in milled condition, with approximately .060" stock allowance. DME No. 5 Steel meets or exceeds the acceptance criteria established by the NADCA as detailed in Technical Digest Number 01-80-01D.
SPECIAL ORDER SIZES: Please contact DME.
Mold Plates and Plate Items Mold Plates are available in over 400 standard sizes, from 6" × 7" to 23 3 ⁄ 4 × 35 1 ⁄ 2 in DME No. 1, No. 2, or No. 3 Steel. Plates from 7 7 ⁄ 8 × 7 7 ⁄ 8 to 23 3 ⁄ 4 × 35 1 ⁄ 2 are also available in DME No. 7 Steel (up to 2 7 ⁄ 8 thick). In addition, they are offered in the following two conditions: FINISH GROUND PLATES Thickness is finish ground top and bottom to a tolerance of ± .001" with all edges finished square and parallel. ROTARY GROUND PLATES Thickness is rotary ground to a tolerance of +.015/+.020 or +.025/+.030 depending on plate width. Length and width are milled (+.000/+.005).
Additional standard plate items include: EJECTOR AND EJECTOR RETAINER PLATES PLATE ITEMS FOR SMALL MOLD BASES
Spacer Blocks Plain, Slotted and Angle Spacers are all made from DME No. 1 Steel. Riser height (C dimension) is finish ground to plus or minus .001".
Ejector Housings Rigid one-piece construction is made from DME No. 1 Steel. Available in over 150 standard sizes, corresponding to DME Standard “A” Series Mold Bases. The riser height (C dimension) is finish ground to plus or minus .001".
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online