Technical training
Service Lift Training Standard / V4
Demonstrate how to tighten and replace cable bin connections to suspension/crossbeam
Lead or facilitate discussion on when and how to tighten and replace cable bin connections to suspension/crossbeam
The participants shall:
Engage in discussions and share experiences on cable bins and seek information in manuals
Practise how to tighten and replace the cable bin by following the manual
ELEMENT 16.4 - FORMATIVE POST-EVALUATION
The participants shall:
Conduct a short questionnaire test to recap the theory and safety issues from Lesson 16
Check own answers and solutions from the shown fact list on completion of the test
TEST AND TRAINING REVIEW
50 min.
ELEMENT 17.1 - THEORY TEST
The instructor shall:
Facilitate a test recapping key safety theory topic
Present solutions and correct answers on completion of the test
Lead a discussion on participants reflections and answers
The participants shall:
Conduct a questionnaire test on intermediate level questions aiming at both knowledge, skills, and abilities (See to GWO Requirements for Training, Annex 5 Taxonomy Framework)
Check own answers and solutions from the shown fact list on completion of the test
Alternative or supplementary practical evaluation activity: The participants affix coloured notes on lift parts for example: red notes on parts that must be visually inspected; green notes on parts that must be tested; blue notes on parts that must be adjusted or replaced in connection to the commissioning inspection. The
Global Wind Organisation ©2024 / www.globalwindsafety.org
100 / 166
Made with FlippingBook flipbook maker