Technical training
Service Lift Training Standard / V4
ELEMENT 12.4 - ROPE ENDS
Learning objective:
71) The participants can explain how to do a visual inspection of the rope ends to ensure they are sufficiently coiled up, as well as how to determine if cutting or shortening of rope ends is needed (Knowledge, intermediate level)
The instructor shall:
Present examples of how to visually inspect coiled up rope ends and lead a discussion about how to coil up wires
Present examples of rope ends, where cutting rope ends is needed
Lead or facilitate discussion on cutting rope ends
The participants shall:
Discuss from rope end examples if shortening rope ends is needed or not, engage in discussions and share experiences on inspecting and shortening rope ends
ELEMENT 12.5 - COUNTER ROLLERS
Learning objective:
72) The participants can explain how to do a visual inspection of the upper and lower counter rollers (Knowledge, intermediate level)
The instructor shall:
Present examples of how to do a visual inspection of upper and lower counter rollers
Lead or facilitate a discussion on how to do a visual inspection (as guided in the manuals) of upper and lower counter rollers and on what to do in case of irregularities according to the manuals
The participants shall:
Global Wind Organisation ©2024 / www.globalwindsafety.org
141 / 166
Made with FlippingBook flipbook maker