2023-05-02_LIFT_V3

Technical training

Lift Standard / V3 2023-05-02

Lead or facilitate a discussion on how and what to inspect in relation to labels and type plates in relation to FADs

The participants shall:

Engage in discussions and share experiences on how and what to inspect in relation to labels and type plates on FADs – and how to apply labels

ELEMENT 15.2 - GENERAL CONDITION

Learning objectives:

128) The participants can explain how to do a visual inspection of the general condition of a fall arrest device, following the relevant manuals (Knowledge, intermediate level) 129) The participants can explain how to do a visual inspection of wear on intake bushing (Knowledge, intermediate level) 130) The participants can explain how to do a visual inspection of the electrical wiring (Knowledge, intermediate level) 131) The participants can explain how to do a visual inspection of the centrifugal system as described in the relevant manual (Knowledge, intermediate level) 132) The participants can perform function and wear test of pinch and centrifugal pulley (Skills, intermediate level)

The instructor shall:

Present key points in relation to the inspection of the general condition of fall arrest devices in different lift types

Lead or facilitate discussion on differences between different fall arrest devices in different lift types

The participants shall:

Take active part in discussions and share experiences working with fall arrest devices

SUPPLY CABLE

10 min.

Global Wind Organisation©2023 / www.globalwindsafety.org

88 / 171

Made with FlippingBook flipbook maker