Technical training
Lift Standard / V3 2023-05-02
The aim of this lesson is to enable the participants to inspect the supply cable and cable bin in accordance with the relevant manuals and inspection lists.
After successfully having completed Lesson 16 of the Lift Commission and Inspection Module:
133) The participants can take responsibility to inspect a supply cable and cable bin as described in the relevant manuals (Skills, intermediate level)
ELEMENT 16.1 - FEED-IN OF SUPPLY CABLE
Learning objective:
134) The participants can explain how to do a visual inspection of the feed-in of a supply cable (Knowledge, intermediate level)
The instructor shall:
Demonstrate how to inspect a supply cable in accordance with the relevant manuals
Lead or facilitate discussion on safety issues in relation to inspecting feed-in of a supply cable
The participants shall:
Take active part in discussions and share experiences from working with feed-in of a supply cables
ELEMENT 16.2 - STRAIN RELIEF
Learning objective:
135) The participants can explain how to do a function test on a strain relief attached to the cabin (Knowledge, intermediate level)
The instructor shall:
Present and demonstrate examples of how to do function test of a strain relief at the cabin by following the relevant manuals
Lead or facilitate discussion on safety issues in relation to strain reliefs at the cabin
Global Wind Organisation©2023 / www.globalwindsafety.org
89 / 171
Made with FlippingBook flipbook maker