Technical training
Service Lift Training Standard / V5 02052025
The aim of this lesson is to enable the participants to take responsibility for the general condition and functionality of the traction hoist in accordance with the manuals and inspection lists.
After successfully having completed Lesson 13 of the Service Lift Inspection and Maintenance Module, the participants can:
88) Take responsibility for visually inspecting the general condition of the traction hoist in a lift, as guided in the manuals (Ability, intermediate level)
89) Perform a function test of the traction hoist as described in the relevant manuals (Skills, intermediate level)
ELEMENT 13.1 - TRACTION HOIST DEVICE
Learning objectives:
90) The participants can perform a function test of the traction hoist (Skills, intermediate level)
91) The participants can perform a visual inspection of the wire in the traction hoist in the lift (Skills, intermediate level)
The instructor shall:
Demonstrate how to test a traction hoist and inspect the wire in the traction hoist
Facilitate practical training on inspecting a traction hoist and wire
Provide feedback to the participants on their performance during the practical training
The participants shall:
Engage in practice on inspecting a traction hoist and wire, share experiences, and apply the received feedback in following exercises
ELEMENT 13.2 - OPERATION HOUR COUNTER
Learning objectives:
92) The participants can describe how to do a visual inspection of the status on operation hour counter of the hoist (Knowledge, basic level)
Global Wind Organisation ©2025 / www.globalwindsafety.org
90 / 170
Made with FlippingBook flipbook maker