Technical training
Service Lift Training Standard / V5 02052025
FALL ARREST DEVICE (FAD)
30 min.
The aim of this lesson is to enable the participants to inspect and test the function of the fall arrest device (FAD) in accordance with the manuals and inspection lists.
After successfully having completed Lesson 15 of the Service Lift Inspection and Maintenance Module, the participants can:
104) Take responsibility for function testing the fall arrest device (FAD) as described in the manuals (Ability, intermediate level)
ELEMENT 15.1 - LABELS AND TYPE PLATES
Learning objectives:
105) The participants can explain how to do a visual inspection of labels and type plates on the FAD as described in the manuals (Knowledge, intermediate level)
106) The participants can explain how to apply labels on the FAD (Knowledge, intermediate level)
The instructor shall:
Present examples of labels and type plates on FADs from manuals
Demonstrate how to apply labels on FADs
Lead or facilitate a discussion on how and what to inspect in relation to labels and type plates in relation to FADs
The participants shall:
Discuss in pairs the principles of inspecting labels and type plates and of applying labels
In pairs, share their conclusions and engage in the following discussions and share experiences on how and what to inspect in relation to labels and type plates on FADs and how to apply labels
Global Wind Organisation ©2025 / www.globalwindsafety.org
96 / 170
Made with FlippingBook flipbook maker