Technical training
Lift Standard / V3 2023-05-02
The instructor shall:
Demonstrate how to inspect, grease, and replace drive and safety ropes
Facilitate practical training on inspecting and replacing drive and safety ropes
Provide feedback to the participants on their performance during the practical training
The participants shall:
Engage in practice, share experiences, and apply the received feedback in following exercises
Note
Correct greasing of the drive rope e.g., 0.4 litres of e.g. HHS 2000 per 100 metre rope
ELEMENT 12.2 - TENSION WEIGHTS
Learning objectives:
113) The participants can explain how to do a visual inspection on tension weights installations in accordance with the relevant manuals (Knowledge, intermediate level) 114) The participants can explain how to inspect tension weights to have distance/space above (full loaded lift) or below (unloaded lift) in accordance with the relevant manuals (Knowledge, intermediate level) 115) The participants can perform an adjustment on tension weights installations in accordance with the relevant manuals (Skills, intermediate level) 116) The participants can perform an adjustment of the tension weights to have distance/space above (full loaded lift) or below (unloaded lift) in accordance with the relevant manual (Skills, intermediate level)
The instructor shall:
Demonstrate how to inspect and adjust tension weights according to relevant manuals and instructions
Facilitate practical training on inspecting and adjusting tension weights
Provide feedback to the participants on their performance during the practical training
The participants shall:
Global Wind Organisation©2023 / www.globalwindsafety.org
130 / 171
Made with FlippingBook flipbook maker