2021 GRS Product Catalog

2021 PRODUCT CATALOG

CONTENTS 02 Customer Work

04

General Tool Setup

06

Air Systems & Handpieces

18

Air Compressors

20

Workholding

34

BenchMate & Jewelry Tools

44

Tool Sharpening

50

Gravers & Accessories

64

Microscopes & Optical Tools

70

Surface Prep & Finishing

72

Practice & Project Pieces

74

Books & DVDs

76

General Information

to

GRS has been making air systems in the USA since the 1960s, all while providing world-class customer service. We have a dedicated sales and product support staff made up of product builders, users, and a FEGA Master Engraver. GRS products, covered by our 2-year Warranty, are tested by a number of the most respected names in the industry. We are trusted by hobbyists, masters, and everyone in between — and we’d like to welcome you to the GRS family of customers. If you ever need anything, don’t hesitate to call or send us a message. We’d love to hear from you!

arturakmaev_watches - Artur Akmaev

electriceyeengraving - Tyler Princeiderio

We love seeing your work! Everthing from rings and things... GRS customers are the best in the world, and we like to take care of you with more than just making tools that solve problems. That’s why we love to promote your artistry and continually feature the work our customers share.

msidengraver - Michael P Siderio

mcthejeweller - Maxime Carrière

2

Customer Work

karl_brenneman_engraving - Karl Brenneman

johnnyoro - John Sorich IV

...to knives, firearms, and even our own tools! The possibilites are endless with tools from GRS, and the artisans who share their work prove this time and time again. We’re blown away with what we see — and here are just a few examples of work from our customers. Kudos to all!

customhandengraving - Jake Newell

bobbywhite - Bobby White

3

Customer Work

Understanding how air tools work

GRS Air Systems are an essential part of daily work for many engravers, stone setters, and other artisans all over the world. Oil-free compressed air travels through the Air System, where it is harnessed and regulated to create the finest control. By setting the speed on the unit, the user is able to work at a consistent speed while applying the power they require via the foot control or hand control. Air pulses then travel into the handpiece where a spring, piston, and anvil deliver smooth strikes, transferring impact to the graver.

California Air

page 18

Val-Air page 19

Other oil-free air source

Just getting started? These items are what we recommend...

1. Oil-Free Air Compressor 2. GRS Air System 3. GRS Handpiece 4. Graver or Tool 5. Sharpening Equipment 6. Workholding 7. Magnification 8. Sturdy Work Surface 9. Adequate Lighting 10. Training Classes, Books, DVDs

4

General Setup

Standard Handpiece

Tool with QC Tool Holder +

GraverMax ® G8

page 6

page 12

GraverMach ® AT

Standard or AT Handpiece

page 6

Tool with QC Tool Holder +

page 10

Add an Airtact to the g8 or Smith System for hand control!

Standard Handpiece

Tool with QC Tool Holder +

GraverSmith ®

page 9

page 12

5

General Setup

Air Systems

#004-965 GraverMach ® AT $1946.00

#004-995 GraverMax ® G8 $1385.00

• Instant switching to hand or foot control • Separation of speed and power • Predictable ultra-smooth start up • Auxiliary port for Ultra 850, air gun, or other

• Separation of speed and power • Predictable ultra-smooth start up

• Auxiliary port for Ultra 850, air gun, or other • Add Airtact Control System for hand control

Length 13" Width 6" Height 8.2" Weight 22.7 lb

Length 12" Width 5.2" Height 8.2" Weight 20.2 lb

The GraverMach AT and the GraverMax G8 air systems both offer... Two Handpiece Connections

Auxiliary Air Connection Variable Strokes Per Minute (400-8000) 2-Year Warranty

Accurate Air Control Foot Control Included

6

Air Systems

Qualit y AMERICAN-MADE

These innovative systems harness the power of air so you can work faster, more efficiently, and with less fatigue. Use any of our air systems for your engraving and stone setting needs.

.com

Made in Emporia, Kansas Visit youtube.com/grstools to learn more about GRS tools made in the USA.

8

Air Systems

#004-895 GraverSmith ® $913.00

#004-935 Airtact ® Control System $454.00 • Upgrade non-AT air systems to add hand control and more • Two handpiece connections • Airtact Handpiece required • Compatible with all GRS systems excluding the GraverMeister

• Updated motor for longevity • Same power output as the GraverMax G8 and GraverMach AT • Ideal for hobbyists up to master-level artisans • Designed to be ultra-durable for many work environments • Separation of speed and power • 2-Year Warranty • Foot control included

Length 6.5" Width 3.7" Height 4.8" Weight 5.75 lb

Length 10" Width 5.8" Height 9" Weight 15.45 lb

“I can do the same quality of work with a GraverSmith as I can with a GraverMach AT or a GraverMax G8.” Sam Alfano, Master Engraver

9

Air Systems

Airtact® Handpieces

#004-921-ATSS Monarch ™ AT Handpiece $400.00 • Designed for the finest shading and cutting techniques • More traditional knob shape offers a comfortable feel • Ideal for fine shading, bulino, and delicate work

Airtact Handpiece requirements & features

GraverMach ® AT or Air System with Airtact Control System

Oil-Free Compressed Air

#004-901-ATSS 901 ® AT Handpiece $400.00

• Fits most engraving and stone setting needs • Great for microengraving, deep relief, bead raising, hammer setting, and more • Ergonomic knob shape offers comfort for extended use • Comfortable for most hand sizes

10

Airtact® Handpieces

#004-940-ATSS Magnum ® AT Handpiece $444.00 • Full range of power from finest shading to heavy hammering ^ • Great for large hand sizes ^ • Ergonomic knob shape provides comfort

More Products Available Online visit grs.com

Not for use with GraverMeister

Hand and Foot Control

Traditional Shape

EasyAT Palm Cap

#004-937 Light $13.25

• Creates a larger area of activation using hand control • Increased sensitivity for better performance • Available in three sensitivities

#004-938 Medium $13.25

#004-939 Heavy $13.25

#004-936 EasyAT Palm Cap, 3 Pack $29.95 Includes one Light, Medium, and Heavy Palm Cap.

11

Airtact® Handpieces

Standard Handpieces

#004-921 QC Monarch ™ Handpiece $315.00 • Designed for the finest shading and cutting techniques • More traditional knob shape offers a comfortable feel • Ideal for fine shading, bulino, and delicate work

#004-926 QC Monarch ™ Handpiece Kit $365.00

Includes Monarch QC handpiece, QC Hand Handle (#004-805), 6 QC Tool Holders, and QC tool tray.

Standard Handpiece Requirements

Oil-Free Compressed Air

Air System

#004-901 QC 901 ® Handpiece $315.00

• Fits most engraving and stone setting needs • Great for microengraving, deep relief, bead raising, hammer setting, and more • Ergonomic knob shape offers comfort for extended use • Comfortable for most hand sizes

#004-910 QC 901 ® Handpiece Kit $365.00 Includes 901 Handpiece, QC Hand Handle (#004-805), 6 QC Tool Holders, and QC tool tray.

12

Standard Handpieces

#004-940-OVAL Magnum ® Oval Handpiece $392.00 • Added weight and length provides more power than the standard palm knob • Full range of power from finest shading to heavy hammering • Great for large hand sizes • Ergonomic knob shape provides comfort

Foot Control

Not for use with GraverMeister

Stainless Steel

#004-940 Magnum ® Palm Handpiece $360.00

• Full range of power from finest shading to heavy hammering • Great for large hand sizes • Ergonomic knob shape provides comfort

13

Standard Handpieces

#004-947 Maestro ™ Original Handpiece $325.00

• Longer length and shape provides a handlebar grip • Combines durable brass and heat- treated steel for added weight • Ideal for fine techniques, scrimshaw, light texturing, and light stippling

#004-905 Maestro ™ EX Handpiece $345.00 • 3.5 times heavier piston delivers more power (compared to the original Maestro) • 20% larger diameter increases weight for more power • Ideal for stippling, texturing, punch dot, light sculpting, hammering, and more

#004-909 Maestro ™ MX Handpiece $373.00

• 72% heavier piston (compared to the Maestro EX) delivers the most power • Size gives the widest range of power and control • Ideal for hammering, texturing, light to heavy sculpting, stippling, stone setting, and more

Maestro Handpieces

Not for use with GraverMeister

Air System Foot Control

#024-210 Handpiece Storage Strip $15.95 • Durable, high-quality molded plastic for long-term use • Holds up to 4 handpieces of varying size • Allows for easy access and quicker handpiece changes

14

Standard Handpieces

Classic Handpieces

Oil-Free Compressed Air

Air System

Not for use with GraverMeister

Foot Control

#004-610 610 Hammer Handpiece $345.00 • Holds square tools up to 0.10” (2.5 mm) and round tools up to 0.13” (3.3 mm) • Stainless steel construction provides long-term durability • Not QC Compatible

#004-850 GRS ® Ultra 850 Handpiece $508.00 • 320,000 RPM motor provides effortless use in many materials • Great for background removal, texturing, glass etching, and more • Accepts 1/16” (1.6 mm) diameter bur shanks • Not compatible with the GraverSmith or GraverMeister

#004-720 QC 720 Handpiece $431.00

#004-710 QC 710 Handpiece $341.00 • Medium to heavy power range • Used for stone setting, hammering,

• Very powerful

impact handpiece

• Great for wood

carving, very heavy metal engraving, or hammering

and medium to deep engraving

• Popular with

motorcycle and car part engravers

15

Classic Handpieces

GraverMeister

#001-842 GraverMeister ® $1914.00

• Built-in vacuum pump saves space • Easily controls air flow with foot control • Classic design features patented technology • Portable • 1600-2400 SPM • 110V Only

#004-915 QC 915 Handpiece $341.00 GraverMeister Handpieces

• Provides excellent control for GraverMeister use • Traditional knob shape promotes ergonomic grip • Ideal for general engraving and stone setting

GraverMeister Only

#004-712 QC 712 Handpiece $345.00 • Offers a wide power range for GraverMeister use • Medium to heavy power range • Used for stone setting, hammering, and medium to deep engraving

More Products Available Online visit grs.com

16

GraverMeister

NSK & Diamond Wheels

#002-910-EVO NSK Emax EVOlution Standard Set with Lever Type Handpiece $1195.00 • Maintains constant speeds, even under load • Smooth and quiet operation for precision work • Bidirectional vibration-free rotation • Quick release lever handpiece • Great for bur work, drilling, hand sharpening, and more

#002-934 NSK Emax EVOlution Torque Multiplier/ Speed Reducer, 4:1 $367.00 • Decreases speed, increasing torque for more power • Increased torque creates cleaner drilling and bur work • For use with the NSK Emax EVOlution

Includes Control Unit, Lever Type Handpiece, (1) Collet Chuck 1/8”, (1) Collet Chuck 3/32”, Handpiece Holder & Stand, Wrench (7 x 5.1), and Pin Wrench.

NSK Emax EVOlution Collets

#002-924 1/16” Collet $79.95

#002-926 1/8” Collet $69.95

#002-925 3/32” Collet $67.00

Diamond Wheels

2.35 mm (3/32") Shank Size

Shape or Polish Gravers

#023-122 Gray Roughing $36.70

#023-123 Blue Medium $44.65

#023-120 Yellow Rubber-Bond Diamond Polishing Wheel $45.10 • Provides perfect mirror finish for carbide and HSS gravers • Easily mounts in a micromotor (like NSK EVO or Electer) or flex- shaft (Foredom ® ) hanging motor • Mirror finish wheel for use at 5,000 RPM max

• Provides quick shaping for carbide and HSS gravers • Easily mounts in a micromotor (like NSK EVO or Electer) or flex-shaft (Foredom ® ) hanging motor • Fast roughness for use at 20,000 RPM max

• Provides refined shaping for carbide and HSS gravers • Easily mounts in a micromotor (like NSK EVO or Electer) or flex-shaft (Foredom ® ) hanging motor • Medium roughness for use at 5,000 RPM max

17

NSK & Diamond Wheels

Air Compressors

#004-984 California Air 4610AC Ultra Quiet Air Compressor, 110 V $377.00 • Increased duty cycle and longer continuous run times • Only generates 60 decibels of sound for quiet operation • Rust-resistant aluminum tank • Oil-free 1.0 HP Motor

THE GRS ADVANTAGE Compressors purchased directly from GRS include the necessary hook-up kit to connect it to our Air Systems.

#004-730 Coalescing Air Filter / Oil-Removal Kit $112.00

• Updated spacer-bracket for better mounting • Allows use of an oil-type compressor • Designed for 1/4” hose

18

Air Compressors

#004-678 Val-Air Air Compressor $1416.00 • Virtually noiseless for a quiet work environment • Features automatic operation for less hassle • Upgraded heavy-duty 1/2 horsepower pump for better performance • Includes in-line moisture trap and coalescing filter • Internally painted tank to prevent rust • Fan included

Please Note: To connect a compressor not purchased from GRS, a Hook-Up Kit is required.

#004-983 Hook-Up Kit for California Air Compressors $44.55 • Use as a replacement hose kit • 50’ (15.24 m) of 1/4” (6.35 mm) hose and brass fitting • Included with compressors purchased from GRS

#004-527 Hook-Up Kit for Compressors $58.05

• Use as a replacement hose kit • 50’ (15.24 m) of 1/4” (6.35 mm) hose and brass fittings • Included with compressors purchased from GRS

#004-615 Quick Disconnect Kit $31.75

#022-163 Silentaire Compressor Oil $25.35 • Formulated for use with SilentAire compressors • 24 fl oz

• Allows quick switching of air handpieces • Includes one main body and two connectors

19

Air Compressors

Workholding

#003-683 MicroBlock ® $305.00 • Small compact design is perfect for stone setting, jewelry work, and small engraving • Easily tilted to check stone depth, or adapt to work needs

#003-773 MicroBlock ® XL $405.00

• Self-centering jaw system makes precision work easier • Rotational resistance from free to locked • Ideal for microscope work • 80 mm Diameter, 50 mm Open

• Larger than the original MicroBlock ® but still provides needed mobility • Ideal for stone setting, jewelry work, and small to medium engraving • Self-centering jaw system makes precision work easier • Rotational resistance from free to locked • Ideal for microscope work • Compatible with all MicroBlock accessories • 100 mm Diameter, 70 mm Open Includes MicroBlock XL Vise, 4 pins, 1 plastic base, 1 rubber base, 1 plastic hex key, 1 wrench, 6 screws, and Thermo-Loc sample kit

Includes MicroBlock Vise, 4 pins, 2 wrenches, 6 screws, plastic base, 1 plastic hex key, and Thermo-Loc Sample Kit.

#003-684 MicroBlock ® + Attachment Set $395.00

#003-774 MicroBlock ® XL + Attachment Set $495.00

#003-674 StepRisers for MicroBlock ® $23.05

• Reduces physical fatigue from improper vise heights • Increases efficiency with fast height adjustability • Securely adds 0.5” with each riser

XL

Set of 5. Each adds 0.5” (12.7 mm) to working height.

20

Workholding

Accessories MICROBLOCK®

#003-651 MicroBlock® Short Jaw Kit $96.15 • Reduces the GRS MicroBlock or MicroBlock XL jaws by 0.374” (9.5 mm) • Compatible with the Alexandre Ring Fixture and I.D. Ring Holder • Features identical pin holes and threads compared to the original MicroBlock jaws • Ideal for microscope work

#003-439 MicroBlock® Rubber Base $11.13 • Provides additional friction and control • Compatible with all GRS MicroBlocks

.com

For information about the Alexandre Ring Fixtures (shown above), see page 40.

#003-530 Standard Block $525.00

• Ideal for traditional jewelry work, stone setting, and general engraving • Rotational resistance from free to locked • Machined from solid stainless steel for durability and longevity • 130 mm Diameter, 76 mm Open

Includes upper jaw plates, 4 pins, base, 1 plastic hex key, and wrench.

#003-615 Low Profile Vise $695.00 • Ideal for all engraving applications • Rotational resistance from free to locked • Machined from solid stainless steel for durability and longevity • Designed to be used with a turntable and microscope • 147 mm Diameter, 89 mm Open

Includes vise, upper jaw plates, 5 pins, base, 1 plastic hex key, and wrench.

#003-531 Standard Block + Attachment Set $617.00

22

Workholding

#003-021 MagnaBlock ™ $748.00

• Ideal for holding large work, hammer and chisel engraving, and more • Rotational resistance from free to locked • Machined from solid stainless steel for durability and longevity • For use with or without a microscope • 147 mm Diameter, 89 mm Open

#003-541 Positioning Vise $998.00

• Positionable center of rotation allows maximum flexibility and accuracy while working, especially under a microscope • Machined from solid steel for durability and longevity • As the largest vise made by GRS, this vise provides the most stability and adjustability available • 180 mm Diameter, 89 mm Open

Includes upper jaw plates, 5 pins, base, 1 plastic hex key, and wrench.

#003-522 MagnaBlock ™ + Attachment Set $830.00

Includes upper jaw plates, 5 pins, base, 1 plastic hex key, and wrench.

23

Workholding

#003-609 Leather Pads $8.10

• Thick, top-grain leather provides an excellent non-marring surface • Perfect for safely holding parts in any engraving block or vise • Use with diamond spray for polishing tools

#023-133 Magnetic Leather Vise Jaw Pads $11.20

• Thick, top-grain leather provides an excellent non-marring surface • Perfect for safely holding parts in any engraving block or vise • Magnets hold pads securely in place

Super Pins • Heavy-duty plastic over steel pins are durable • Ideal for holding larger items without marring

#003-546 1/4” Super Pins $12.95

#003-547 3/8” Super Pins $9.95

#003-775 Universal Positioning Pin Vise $230.00

• Self-centering jaw system • Ideal for smaller items such as watch parts, pendants, small knives, and more • Always work within center under the microscope • Bidirectional rotation • Fits all GRS vises

Visit youtube.com/grstools to see the Universal Positioning Pin Vise in action!

Includes 1 rubber base

#003-662 Ball Vise 1/4” Hex Key $19.00 • Knurled aluminum handle provides easy gripping surface • Low-profile design means it can stay in chuck while vise is in use

#003-520 520 Attachment Set $118.00

• Includes a variety of pins for upper jaw plates on GRS blocks • Solves workholding problems quickly

• Fits all GRS vises except the MicroBlock ® & MicroBlock ® XL

Includes 4 one-half Thermo-Loc sticks, 8 small pins, 4 flat square pins, 2 rectangular inset-curve pins, 4 thick round inset pins, 8 rubber-coated pins, and 2 leather-faced ring clamp pins in molded base.

24

Workholding

#003-623 Contour Vise Jaws $75.90

• Safely holds irregularly shaped parts to eliminate or reduce potential surface damage • Fits the top holes of most GRS vises and blocks • Hard, rubber-lined jaws conform to grip using minimal clamping force

#003-622 Knifemakers Contour Vise $107.00 • Secures knives in seconds without high clamping force • Holds unusual and compound shapes easily • Adjustable for a wide range of widths and depths Works with All GRS Vises except MicroBlock & Multi-Purpose Vise

25

Workholding

Mike Dubber Fixture Set • Designed by FEGA Master Engraver Mike Dubber • Provides great workholding solutions for parts of the Single Action Army Revolver

#003-726 Complete Set $795.00

Includes Barrel and Cylinder Holder, Horizontal Scribe Holder, Vertical Scribe Holder, Backstrap Holding Plates, Ejector Tube Holder, Hammer Holder with Extra Aluminum Jaw Set, Trigger Guard Holder, Screw Holder, Loading Gate Stabilizer, Frame Bracket Holders, Heavy Spring, Hex Wrench Set, Carbide and Stainless Steel Scribes, and Storage Tray.

#003-725 SAA Fixture Set without Barrel Fixture $459.00

#003-715 SAA Barrel Fixture $385.00

26

Workholding

#003-698 Workholding Plate Assembly $47.40

• Designed to hold work without damage • Use with modeling clay or Thermo-Loc • Perfect for detailing thin, light pieces • Clamps securely in vise jaws

#011-476 BPE Hobo Nickel Kit $26.20 • Securely hold nickles in the vise jaws • Easily mask common areas to keep them intact • Protect finished nickels with storage cases

#011-479 BPE Hobo Nickel Case $3.10

Single case. Nickel not included.

#004-699 Scope Ring Fixture $74.95

• Securely holds rifle scope rings from the inside • Fits 1” and 30 mm inner-diameter scope rings • Similar to the Horizontal Ring Holder (#004-679)

More Products Available Online visit grs.com

27

Workholding

Thermo-Loc ®

• Rigid at room temperature yet becomes pliable when heated or warmed • Developed to hold irregularly shaped or fragile items • Simply reheat and reuse • Non-toxic and biodegradable

#003-667 Thermo-Loc ® Starter Kit $59.95 Includes 6" (152.4 mm) square special non-stick PTFE material pad for microwave use and 1 pound of Thermo-Loc. 1 lb = approx. 60 sticks.

#003-664 Thermo-Loc ® Sticks, 0.5 lb (225 Gm) $35.00 0.5 lb = approx. 30 sticks

#003-665 Thermo-Loc ® Sticks, 1.0 lb (450 Gm) $55.00 1 lb = approx. 60 sticks

#003-666 Thermo-Loc ® Sticks, 5.0 lb (2.26 Kg) $225.00 5 lb = approx. 300 sticks

#003-745 Thermo-Loc ® Jaw Set $93.45

• Specially machined to keep Thermo-Loc in place • High-quality stainless steel • Great for making custom forms for working on several identical pieces

• Works with Universal Pin Vise (#003-775) and BenchMate Pin Vise (#004-879)

#004-800 Thermo-Loc ® Handles $15.15 • Thermo-Loc core securely holds tools • Simply reheat and change tools • Great for files, traditional gravers, and more

#003-291 Low-Friction PTFE Pad for Thermo-Loc ® $17.25 • Microwavable pad for heating Thermo-Loc • Allows Thermo-Loc to be heated without sticking

28

Workholding

#003-699 Thermo-Loc ® Form Block $37.15 • Easily allows users to make custom

Thermo-Loc workholding fixtures • Provides a variety of slot sizes for different work sizes • Create reusable forms for repeat projects

29

Workholding

#003-750 Satellite ® Fixed Top Package $549.00

• 10-inch steel surface • Provides a large area for adjustability • Adds stability to the Positioning Vise

#003-738 Satellite ® Catch Pan $95.00

#003-656 Satellite ® Turntable $438.00

#003-735 Satellite ® Turntable Stand $443.00

• Allows users to easily work on larger pieces • Provides incredible stability • Take control of your work and find freedom from your bench • Adjusts from 18” to 29” to create ideal work elevations • Requires turntable, such as the Satellite Turntable (#003-656)

• Provides a completely overhauled bearing system for minimum maintenance • Has an incredibly smooth, quiet glide • Sealed profile limits contamination from metal chips and debris

Includes Brake Kit (#003-343) and Low-Friction PTFE Pad (#044-165). Does not include vise, Satellite Stand, or Centering Post.

30

Workholding

Turntable SATELLITE®

#003-740 Satellite® Turntable Package $831.00 • Allows users to easily work on larger pieces • Provides incredible stability and easy storage when not in use • Adjusts from 18” to 29”, creating ideal work elevations • Includes smooth and quiet Satellite Turntable (#003-656)

.com

31

Workholding

1.1" High (27.82 mm) 10.1" Round (256.54 mm)

0.661" High (16.78 mm) 10" Round (254 mm)

#003-616-V2 GRS ® Turntable Base Kit $341.00

#003-656 Satellite ® Turntable $438.00 • Provides a completely overhauled bearing system for minimum maintenance • Has an incredibly smooth, quiet glide • Sealed profile limits contamination from metal chips and debris Includes Brake Kit (#003-343) and Low- Friction PTFE Pad (#044-165). Does not include vise, Satellite Stand, or Centering Post.

• Lets you reposition the work’s center of rotation for working under a microscope • Features a 10” (254 mm) diameter turntable surface • Designed with a unique bearing system coupled between the two flat ground steel plates • Includes a removable centering post to position the turntable directly under the microscope Includes Brake Kit (#003-343) and Low- Friction PTFE Pad (#044-165), also sold separately. Does not include vise or block.

#003-639 Centering Post $15.95

32

Workholding

#004-559 Optional Mounting Adapter $32.95 1. Mount to a bench

• Add a sturdy, stable mounting surface to curved or thin bench tops for attaching the Fixed Mounting Plate

#004-557 Fixed Mounting Plate $21.25

• Attach directly to the front of a thick bench, an Optional Mounting Adapter, or an Adjustable Height Bracket for an easy workholding solution

2. Adjust Height

#004-666 Adjustable Height Bracket and Fixed Mounting Plate Kit $59.95

• Adds 4" to work support • Adjustable in 1/2" increments.

#004-578 Standard Block Shelf $49.95 3. Attach shelf

• Recommended for use with the Standard Block, MicroBlock, and MicroBlock XL

#004-665 Large Block Shelf and Adjustable Height Bracket Kit $91.50

• Uses fixed mounting plate to hold a vise below the front of a bench • Allows the vise to be the same height as a bench pin • Provides a secure, sturdy surface for workholding • Secure surface for mounting a turntable

#004-672 Turntable Mount Kit $21.55

#003-649 Block Vise Shelf Support $70.05

Required to attach Satellite Turntable (#003-656) to large block shelf.

• Adds stability to reduce vibration when using a Block Shelf

33

Workholding

BenchMate ® & Jewelry Tools

engraved practice plate by Sergej Manaenko with stone setting by Nadja ihsen

BenchMate Encore ® QC Fixtures

• Ideal for stone setting, small engravings, and precision work • Great for use with or without microscope • High-quality material is durable and well made

#004-716 Wood Block $45.50

#004-714 Pitch Cup $45.00

• Ideal for gluing work in place

#004-879 Pin Vise $225.00

• FIlled with pitch that softens when heated • Hold fragile, small, or irregular pieces #004-713 Pitch Cup without Pitch $37.50 • Great for Thermo- Loc, pitch, or other workholding material

#004-877 Horizontal I.D. Ring Holder $83.20

• Features a self- centering jaw system

#004-878 Vertical I.D. Ring Holder $72.40

• Holds ring

securely from the inside

• Vertical form for easy access to the sides of rings Includes Vertical I.D. Ring Holder and 10 Mandrels.

#024-213 BenchMate ® QC Storage Strip $15.85

Includes Vertical I.D. Ring Holder and 10 Mandrels.

• Storage solution for all BenchMate QC Fixtures

#004-845 BenchMate ® Retrofit Kit $139.00

#004-558 Extra Plastic Jaws $10.25

• Upgrade your GRS Original BenchMate for QC fixture compatibility

For use with the BenchMate. Package of ten plastic jaws.

34

BENCHMATE ench ate & Jewelry Tools

Workholding BENCHMATE ®

QCX shown with the Vertical I.D. Ring Holder Fixture, sold separately (#004-878) or included in the Stone Setter’s Package (#004-832).

BenchMate Encore ® QC • Holds work steady yet is easily repositionable to accommodate a range of techniques and jobs • Arm measures 6" and features a cutout for superior access angles and better clearance when using tools • Vertical position adjusts for maximum comfort and control • Features drop and lock QC fixtures

BenchMate Encore ® QCX • Delivers the widest range of motion available from any hands-free workholding tool • Easily keeps work centered under a microscope • Holds work steady yet is easily repositionable to accommodate a range of techniques and jobs • Features drop and lock QC fixtures

#004-832 Stone Setter’s Package $546.00 #004-831 Basic Package $389.00

Stone Setter’s Package includes BenchMate Encore QCX, Fixed Mounting Plate (#004-557), Horizontal I.D. Ring Holder, Vertical I.D. Ring Holder, Bench Pin Kit (#004-556), Encore QCX Accessory Pack with 4 Extra Plastic Jaws (#004-558), 2 wrenches (5/32" Allen and large spanner), and 5 mounting screws. Basic Package includes BenchMate Encore QCX, Fixed Mounting Plate (#004-557), Encore QCX Accessory Pack with 4 Extra Plastic Jaws (#004-558), 2 wrenches (5/32" Allen and large spanner), and 5 mounting screws.

#004-839 Basic Package $349.00 #004-840 Stone Setter’s Package $498.00

Basic Package includes BenchMate Encore QC, Fixed Mounting Plate (#004-557), Encore QC Accessory Pack with 4 Extra Plastic Jaws (#004-558), 2 wrenches (5/32" Allen and 3/16" hex), and 5 mounting screws.

Stone Setter’s Package includes BenchMate Encore QC, Fixed Mounting Plate (#004-557), Horizontal I.D. Ring Holder, Vertical I.D. Ring Holder, Bench Pin Kit (#004-556), Encore QC Accessory Pack with 4 Extra Plastic Jaws (#004-558), 2 wrenches (5/32" Allen and 3/16" hex), and 5 mounting screws.

35 .com

BenchMate & Jewelry Tools

Sawing Plates #004-680 for Right Hand $39.55

#004-556 Bench Pin Kit $34.95 #004-108 Wood Replacement Pin $6.63

#004-684 for Left Hand $41.35

#004-628 Multi-Purpose Vise $195.00 • Precision-made steel vise adjusts for tilt and rotation on two axes • Provides comfort and efficiency • Uses the versatile “lift on / lift off” BenchMate mounting system

#003-520MPV Attachment Set For Multi- Purpose Vise $140.00

• Includes a variety of pins for upper jaw plates on GRS blocks • Solves workholding problems quickly Includes 4 one-half Thermo-Loc sticks (not shown), 8 small pins, 4 medium dark pins, 4 flat square pins, 2 rectangular inset-curve pins, 4 thick round inset pins, 8 rubber-coated pins, 2 leather-faced ring clamp pins, and 2 pin plates in molded base. For use with the Multi-Purpose Vise (#004-628) for BenchMate.

36

BenchMate & Jewelry Tools

Third-Hands

GRS Third-Hands offer high quality, sturdy construction for aiding the soldering and holding process.

Third-Hand Attachments

Third-Hand with Soldering Station

#004-546 Standard $51.95

#004-646 Short $47.50

#004-570 Standard Double $159.00

Standard = 3 points of articulation

Includes attached non-asbestos soldering station. Max 600°F (316°C).

Short = 2 points of articulation

#004-545 Short Double $114.00 Includes attached non-asbestos soldering station. Max 600°F (316°C).

Includes Weighted Base

Third-Hand with Base

#004-689 Short $55.15

#004-568 Standard $68.35

#004-569 Soldering Station $45.75

Soldering Board #004-129

#004-691 High-Temp Soldering Platform $96.15

• Perfect for brazing and soldering most precious and base metals • Made for high-temperature work on platinum • Works great with GRS Third-Hand Attachments with tungsten jaws • Max operating temp: 3200°F (1760°C)

#004-130 4-Inch $15.59

6-Inch $14.68

• For indirect heating or soldering use with Third-Hand Attachments • 6" surface aids in the soldering process • Max 600°F (316°C)

• Works with the

BenchMate system • Aids in the soldering process • Max 600°F (316°C)

Steel Soldering Fingers

Third-Hand Jaw Point

#004-592 Insulated Soldering

Clamp $65.90

• Works with the Third-Hand Attachments • Aids in the

#004-097 Standard $9.22

#004-552 Narrow $11.50

• Works with the

BenchMate system or in a vise

soldering process

• Steel

• Aids in the

#004-097TUNG Tungsten $13.45

construction in narrow or wide format

#004-553 Wide $12.95

soldering process • Max 600°F (316°C)

37

BenchMate & Jewelry Tools

Inside Ring Holder

#004-589 Inside Ring Mandrel $95.05 • Adds inside ring- holding capability to any BenchMate ® • Allows greater

• Made for use in blocks and vises • Holds rings securely from the inside • Vertical form for easy access to the sides of a ring

Rings by Todd Daniels

#004-616 Extra Collet Set $51.80 • Replacement set of collets • Compatible with Horizontal Inside Ring Holder (#004- 679) and Inside Ring Mandrel (#004-589)

access to the outside of ring • Prevents ring

from flexing while working

#004-679 Horizontal $73.40

#004-847 Vertical $61.55

#004-697 Inside Ring Engraving Holder $74.15 • Unique holder secures rings, allowing easy access to the inside • Can be handheld or mounted in a vise • Made by GRS from solid steel to last a lifetime

#004-625 Handheld Ring Clamp $55.90

• Lightweight for hand use

practice ring by Todd Daniels

#003-550 Ring Clamps $24.45 • Leather-faced ring clamps for

• Parts are machined from solid aluminum and steel • Holds rings securely without marring • Does not fit BenchMate

easy, secure workholding

• Fits upper pin plates,

MicroBlock ® , and MicroBlock ® XL

38

BenchMate & Jewelry Tools

#004-705 Set of 10 Mandrels for I.D. Ring Holder $23.35 • Replaces original set of mandrels for the GRS I.D. Ring Holder

#004-735 ID Ring Holder $83.20

• Securely holds rings and cylindrical pieces for workholding • Equal expansion pressure eliminates uneven grip • Unique locking action allows ring to stay secure, as needed • Ability to tighten without tools Includes (1) Ring Holder Body, (2) Sets of 10 Mandrels, (2) Standard Cones, (2) Locking Cones, (1) Drawbar, (1) Drawbar Knob, (1) Hex Nut, and (1) GRS Hex Wrench. Mandrel Sizes: 13.5 mm, 14.5 mm, 15.5 mm, 16.5mm, 17.5 mm, 18.5 mm, 19.5 mm, 20.5mm, 21.5 mm, and 22.5 mm.

#004-707 ID Ring Holder Parts Kit $71.82

• Replacement parts for the GRS I.D. Ring Holder (#004-735) • Make a complete package for an Outside Frame Assembly for I.D. Ring Holder (#004-754)

Includes (2) Sets of 10 Mandrels, (2) Standard Cones, (2) Locking Cones, (1) Drawbar, (1) Drawbar Knob, (1) Hex Nut, and (1) GRS Hex Wrench. Mandrel Sizes: 13.5 mm, 14.5 mm, 15.5 mm, 16.5mm, 17.5 mm, 18.5 mm, 19.5 mm, 20.5mm, 21.5 mm, and 22.5 mm.

#004-754 Outside Frame Assembly for I.D. Ring

• Allows better clearance and more angles while working on rings • Set screws allow free positioning when removed or easy positioning in a vise when installed • Use with the I.D. Ring Holder (#004-735) or with the I.D. Ring Holder Parts Kit (#004-707)

Ring by Eberhard Mach

Holder $35.05

#004-755 I.D. Ring Holder Expansion Kit $34.95

• Doubles the working area of the GRS I.D. Ring Holder • Accommodates two mandrels at once • Allows working on two rings at the same time or working on one wider ring • Used with the GRS I.D. Ring Holder (sold separately)

39

BenchMate & Jewelry Tools

Alexandre Ring Fixture

#003-783 Alexandre Stone Setter’s Package $688.00

Includes Alexandre Ring Fixture (#003-782): 2 bell-shaped jaw attachments, 6 button-head cap screws, 1 wrench, 1 short horizontal drawbar, 1 long horizontal drawbar, 1 vertical drawbar, 2 plastic standard cones, 2 plastic locking cones, 1 steel standard cone, 1 double-sided cone, 1 cone cover, 1 countersunk screw, 20 expanding mandrels, and 1 aluminum storage tray. Includes GRS MicroBlock® (#003-683): Vise, 4 pins, 1 wrench, 6 screws, plastic base, 1 plastic hex key, and Thermo-Loc Sample Kit.

• Designed by world-renowned diamond setter Alexandre Sidorov • Mounts directly to the GRS MicroBlock ® • Bell-shaped jaw attachments enhance the function of the vertical and horizontal drawbars • Spherical base on vertical ring holder permits multi- axis movement for superior access to the work surface

#003-782 Alexandre Ring Fixture $430.00

Includes 2 bell-shaped jaw attachments, 6 button-head cap screws, 1 wrench, 1 short horizontal drawbar, 1 long horizontal drawbar, 1 vertical drawbar, 2 plastic standard cones, 2 plastic locking cones, 1 steel standard cone, 1 double-sided cone, 1 cone cover, 1 countersunk screw, 20 expanding mandrels, and 1 aluminum storage tray. MicroBlock® not included.

#003-747 Alexandre Ring Fixture Adapter $74.95

• Enables the use of Alexandre Ring Fixture (#003-782) in GRS Standard Block

40

BenchMate & Jewelry Tools

Slide & Lock The Slide & Lock system was designed by JA Master Bench Jeweler Jeff Mathews to help jewelers work more efficiently. By simply opening the brass handle you can quickly reposition the height of your work for easy adjustments or to move to the next task. • Support up to two separate tools at once • Ergonomically designed to reduce strain and weariness in hands, neck, and back • Positions work for viewing through microscope or OptiVISOR • Easily slide the holder into position and lock it • Adjust height in seconds • Lock is easily reversed for right- or left- hand use • Supports a maximum weight of 35 pounds

#004-757 Original $225.00

#004-758 Mini $195.00

Tru-Axis Developed for use with Microscopes This design allows the ability to maintain a set height of the Slide and Lock, enabling the Tru-Axis portion to travel up to 4" vertically without contacting the microscope.

#004-759 Tru-Axis $375.00

Toolless height adjustment Flexibility

+

=

Attach two tools using the GRS Fixed Mounting Plates Productivity

#004-753 Tru-Axis Adapter $225.00

Slide & Lock Original #004-757

Slide & Lock Tru-Axis #004-759

41

BenchMate & Jewelry Tools

#004-106 Shellac Pad $15.11

#004-660 PitchCup $30.25

• Provides small, stable surface • Easily add shellac or other materials • Works with vises, blocks, and the BenchMate

• Filled with pitch that softens when heated • Hold fragile, small, or irregular pieces • Fits most vises, blocks, and the GRS BenchMate ® • Small, compact size #004-659 PitchCup (No Pitch Included) $19.77 • Empty cup for customizable workholding material • Fill with pitch or GRS Thermo-Loc ® to use

#003-022 PitchBowl $79.20

• Filled with pitch that softens when heated • Hold fragile, small, or irregular pieces • Fits most vises and blocks • Medium, compact size

#002-230 Pitch (1 lb) $23.21

• For use with PitchBowl, PitchCup, and any other appropriate workholding container

42

BenchMate & Jewelry Tools

#004-725 GRS ® Metal Former $337.00 • Creates “C” shapes in strips in soft metals like silver, copper, and gold • Soft alloy material supports die pressure but does not distort engraved work • Material can be reformed by heating, as necessary • Form strips from 0.25” (6.35 mm) up to 1.25” (31.75 mm) wide into domed shapes • Works for metal thickness of 0.030” to 0.080” (0.76 mm to 2.03 mm)

#004-726 Urethane Die Cup and Flat Die Set for GRS ® Metal Former $63.20 • Use with non-traditional jewelry metals • Can form some stainless steels up to 0.080” (2 mm) thick • Create a flat form

More Products Available Online visit grs.com

Ring Size Cutter • Simplifies ring sizing by removing an exact amount of ring shank • Cut is precisely to size and always parallel so soldering is neat and fast • For gold or silver rings only

#004-642 USA / British Model $338.00 Includes 7 cutters from USA/British size 1/2” to 2” in 1/4” increments. #004-585 Replacement USA / British Cutter Kit $98.95 Includes 7 cutters.

#004-643 Metric Model $338.00 Includes 9 cutters from 1 mm to 5 mm in 0.5 mm increments. #004-600 Replacement Metric Cutter Kit $84.05 Includes 9 cutters.

43

BenchMate & Jewelry Tools

Rough, sharpen, and polish high-speed steel or carbide gravers faster with the GraverHone VS. This variable-speed hone features high torque with an American-made motor promoting the highest quality and longevity. GraverHone ®

#003-598 GraverHone ® VS, 110 V $845.00

• American-made motor for the highest quality and longevity • Durable, heavy-duty unit body • Variable speed with dual direction rotation • 400-900 RPM

#003-800 GraverHone ® VS Complete GRS Apex ™ Sharpening System $1299.00 • GraverHone VS features variable speed and dual direction • Marked, color-coded dials make sharpening faster • Easy for beginners, fast for advanced users Includes GraverHone VS, GRS® Apex Sharpening System, GRS® Apex Fixture, GRS® Apex Post, Dual Angle Dial, Speedline Dials (90, 105, 120 degree), Diamond Wheels (260, 600, 1200 grit), and Diamond Wheel Rack.

#003-801 GraverHone ® VS Complete Dual Angle Sharpening System, 110 V $1289.00 • GraverHone VS features variable speed and dual direction • Premium fixture post for Dual Angle fixture improves performance • Create custom tool angles quickly and easily Includes GraverHone VS, Diamond Wheels (260, 600, 1200 grit), Diamond Wheel Rack, and Dual Angle Fixture with Premium Sharpening Post.

44

Tool Sharpening

Sharpening GRS APEX™

#003-760 GRS Apex™ Sharpening System $325.00

• Sharpen faster with step-by-step marked angles • Premium fixture post improves stability • Creates efficient repeatability • Easy for beginners, fast for advanced users Includes the GRS® Apex Sharpening Fixture, Speedline Dials (90, 105, 120 degree), Dual Angle Dial, GRS® Apex Fixture Post, and Storage Rack.

45 Tool Sharpening .com

#003-570 Dual Angle Sharpening Fixture $315.00 • Features an accurate and secure locating seat for a wide variety of tools • Set elevation and rotation quickly with two degree dials

#003-706 QC Locking Adapter Kit $39.80 • Updates classic non-QC Dual Angle Fixtures immediately • Saves money and time with this simple update • Exclusively accepts QC Tool Holders for faster tool switching

#003-571 Dual Angle (Head Only) $282.00

More Products Available Online visit grs.com

EasyGraver ® Sharpening Fixtures

#003-701 105° $155.00

#003-700 120° $155.00

• Extremely easy to understand and fast to use, especially for beginners • Saves time with easy repeatability and accuracy • Exclusively accepts QC Tool Holders for faster tool switching

Please note that the Post Assembly (#003-502) IS NOT INCLUDED and must be purchased separately.

46

Tool Sharpening

#003-760 GRS Apex ™ Sharpening System $325.00

• Sharpen faster with step-by-step marked angles • Premium fixture post improves stability • Creates efficient repeatability • Easy for beginners, fast for advanced users

#003-769 GRS Sharpening Post $40.70 • 80 lb magnet • Use the included cover to dampen the strength • Overall post height has been extended

#003-761 GRS Apex ™ Dual Angle Fixture $287.00

to 7” for use with longer gravers • Post promotes more accurate, repeatable grinds

• Features an updated design with familiar function • A shorter front profile accommodates longer gravers • Exclusively accepts QC Tool Holders for faster tool switching • Premium fixture post improves stability

#003-762 GRS Apex ™ Speedline Dial Set $86.40 • Sharpen faster with step-by-step marked angles • Creates efficient repeatability • Easy for beginners, fast for advanced users

#003-438 GRS Apex ™ Organizer Rack $28.62 • Rack features 4 slots for GRS ® Apex Speedline Dials (not included)

47

Tool Sharpening

Diamond Spray • Improves surface polishing ability • Atomized spray bottle allows for easy application • Perfect for a variety of gravers and tools • For use with the GRS ceramic and cast iron laps

#002-412 Cast Iron Lap, 6” (150 mm) $125.00 • Provides a finer, longer-lasting finish • Perfectly made for gravers and tools, especially carbides • Both sides are prepared for sharpening, doubling the life of the wheel

Extra Fine

1 Micron Diamond Spray (#002-754) or Diamond Powder (#023-200) recommended. Size: 6” / 150 mm.

#002-752 1/4 Micron $32.30

#002-129 Wheel Blank, 5” (125mm) $30.20 • Medium 5” diameter surface provides adequate space • Precision aluminum gives a flat, even surface • Blank surface allows for custom roughing, polishing, and more #002-537 Wheel Blank, 6” (150mm) $36.95 • Large 6” diameter surface provides more space • Precision aluminum gives a flat, even surface • Blank surface allows for custom roughing, polishing, and more

Fine

#002-753 1/2 Micron $32.30

Medium

#002-754 1 Micron $32.30

Coarse

#002-755 3 Micron $32.30

#023-200 Diamond Powder, 5 carat 1/2 Micron $21.55 • Creates polishing surface for ceramic or cast iron laps • Contains 5 carat (1 gram) at 1/2 micron • Perfect for use with GRS GraverHone ® and Power Hone

#002-415 Ceramic Lap, 6” (150 mm) $313.00

• The ceramic wheel is efficient yet durable with normal use • Provides a mirror finish for brighter cuts • Perfect for use with GRS GraverHone ® and Power Hone • Requires diamond spray or diamond powder for proper polishing

48

Tool Sharpening

Diamond Wheels, 5" (125 mm)

#001-838 Quick Wheel Change Adapter $82.90

• Diamond wheels from GRS last for years • Surface stays flat for improved accuracy • Use with GRS GraverHone ® and Power Hone for sharpening carbide & HSS gravers

• Replaces the

standard wheel knob on the original Power Hone for quick and simple wheel changes

Fine

#002-139 1200 Grit $99.65

#001-694 Wheel Storage Rack $24.35 • Protect and organize up to 5 wheels • Steel construction • Wheels sold separately

#002-055 600 Grit $99.65 Medium

coarse

#002-138 260 Grit $110.00

#011-194 180 Grit Gator $151.00 Very coarse

More Products Available Online visit grs.com

49

Tool Sharpening

Gravers & Accessories C-Max ® Gravers

Years of development led to this tungsten carbide graver with the right blend of hardness and toughness for hand engraving and stone setting applications. Try these tools and do better work in noticeably less time.

C-Max ® Round Blank

#022-611 1/8” Round (3.18 mm)

2” (50 .8 mm) Long $10.25 USE WITH QC TOOL HOLDER FOR 1/8” ROUND (#004-873)

#022-393 2.35 mm Round (3/32”)

1.77” (45 mm) Long $6.50 USE WITH QC TOOL HOLDER FOR 3/32” ROUND (#004-853)

#022-622 1.8 mm Round (1/16”)

2” (50 .8 mm) Long $8.95 USE WITH QC TOOL HOLDER FOR 1.8 MM TOOLS (#004-852)

#022-780 1.8mm, 10 Pack $79.50

C-Max ® Square Blank

#022-610 3/32” (2.38 mm)

2” (50 .8 mm) Long $19.50 USE WITH TRADITIONAL QC TOOL HOLDER (#004-803)

#022-612 2 mm Square (5/64”

1 .96” (50 mm) Long $19.50 USE WITH TRADITIONAL QC TOOL HOLDER (#004-803)

C-Max ® Stepped Round Graver $10.25 each USE WITH QC TOOL HOLDER FOR 3/32" ROUND (#004-853)

1 .77” (44.96 mm) Long

#022-782 0.8mm

#022-783 1.0 mm

#022-784 1.2 mm

#022-785 1.4mm

#022-786 1.6 mm

#022-787 1.8 mm

#022-788 2.0 mm

#022-789 2.2 mm

#022-791 Taper Point $15.95

#022-854 Set of Gravers $95.00

50

Gravers & Accessories

C-Max ® Narrow Bevel

C-Max ® Onglette $19.50 each USE WITH QC TOOL HOLDER FOR 1/8" ROUND (#004-873) 1.8” (45.72 mm) Long

1.8" ( 45.72 mm) Long

#022-625 #0

#022-626 #1

#022-627 #2

#022-628 #3

#022-629 #4

#022-630 #5

$19.50 each USEWITHQCTOOLHOLDERFOR1/8"ROUND(#004-873)

#022-667 90°

#022-668 105°

#022-669 120°

C-Max ® Parallel Flat $19.50 each USE WITH QC TOOL HOLDER FOR 1/8" ROUND (#004-873) 1 .8 ” (45.72 mm) Long

#022-714 #40 1.0 mm

#022-715 #41 1.2 mm

#022-716 #42 1.4 mm

#022-717 #43 1.6 mm

#022-718 #44 1.8 mm

#022-719 #45 2.0 mm

#022-712 #38 0.6 mm

#022-713 #39 0.8 mm

C-Max ® RFF Point $19.50 each USE WITH QC TOOL HOLDER FOR 1/8" ROUND (#004-873) 1 .8 ” (45.72 mm) Long

#022-792 30°

#022-794 60°

#022-795 75°

#022-796 90°

#022-797 105°

#022-798 120°

#022-793 45°

C-Max ® Tapered Flat $19.50 each USE WITH QC TOOL HOLDER FOR 1/8" ROUND (#004-873) 1 .8” (45.72 mm) Long

#022-723 #36 0.2 mm

#022-724 #37 0.4 mm

#022-725 #38 0.6 mm

#022-726 #39 0.8 mm

#022-727 #40 1.0 mm

#022-728 #41 1.2 mm

#022-729 #42 1.4 mm

#022-730 #43 1.6 mm

#022-731 #44 1.8 mm

#022-732 #45 2.0 mm

C-Max ® Tapered Round $19.50 each USE WITH QC TOOL HOLDER FOR 1/8" ROUND (#004-873)

1 .8” (45.72 mm) Long

#022-680 #50 0.2 mm

#022-681 #51 0.4 mm

#022-682 #52 0.6 mm

#022-683 #53 0.8 mm

#022-684 #54 1.0 mm

#022-685 #55 1.2 mm

#022-686 #56 1.4 mm

C-Max ® V-Point $29.75 each USE WITH QC TOOL HOLDER FOR 1/8" ROUND (#004-873)

More Products Available Online visit grs.com

#022-615 60°

#022-616 75°

#022-617 90°

#022-618 105°

#022-619 120°

51

Gravers & Accessories

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80

grs.com

Made with FlippingBook Ebook Creator