1. List of Abbreviations | 4 |
2. Terms and Definitions | 4 |
2.1 CoHE Roles and Responsibilities | 8 |
3. Change Log | 10 |
4. Scope | 11 |
5. General requirements for the CoHE Training Standard | 12 |
5.1 Overview | 12 |
5.2 Target Groups | 12 |
5.3 Aims and Objectives | 12 |
5.4 Duration of the CoHE Modules | 13 |
5.5 Validity Period | 13 |
5.6 Course Codes | 14 |
5.7 Participant Prerequisites for the CoHE Modules | 14 |
5.8 Instructor Qualification Prerequisites | 14 |
6. Resources required to deliver CoHE Modules | 15 |
6.1 Instructor to Participant Ratio | 15 |
6.2 Training Facilities & Equipment | 15 |
7. Using this Standard to Develop Training | 16 |
7.1 Lesson planning | 16 |
7.2 Participant Performance Assessment | 16 |
7.3 Alignment References | 16 |
8. COHE Electrical Safety Module | 19 |
8.1 Aims and Objectives of the CoHE Electrical Safety Module | 19 |
8.2 Duration of the CoHE Electrical Safety Module | 19 |
8.3 Instructor to Participant Ratio for CoHE Electrical Safety Module | 20 |
8.4 Equipment for the CoHE Electrical Safety Module | 20 |
8.5 Timetable for the CoHE Electrical Safety Module | 20 |
8.6 Detailed Description of the CoHE Electrical Safety Module | 21 |
Lesson 1 - Introduction to the Training | 21 |
ELEMENT 1.1 - Safety instructions and emergency procedures | 22 |
ELEMENT 1.2 - Facilities | 22 |
ELEMENT 1.3 - Introduction | 22 |
ELEMENT 1.4 - Aim and objectives | 23 |
ELEMENT 1.5 - Ongoing assessment | 24 |
ELEMENT 1.6 - Motivation | 24 |
ELEMENT 1.7 - Human factors | 25 |
Lesson 2 - Responsibilities & role of a Qualified Electrical Person | 27 |
ELEMENT 2.1 - Responsibilities and role of a qualified electrical person | 27 |
Lesson 3 - Electrically safe working conditions | 29 |
ELEMENT 3.1 - Electrical safe working practices & PPE | 29 |
ELEMENT 3.2 - Treating all electrical equipment as live until an electrically safe work condition has been established | 30 |
ELEMENT 3.3 - When to establish an electrically safe working condition | 31 |
ELEMENT 3.4 - How to establish an electrically safe working condition | 32 |
Lesson 4 - Testing and isolation | 33 |
ELEMENT 4.1 - Electrical measurement equipment | 34 |
ELEMENT 4.2 - 3-point test method to prove the absence of voltage | 37 |
ELEMENT 4.3 - Isolation of electrical equipment | 37 |
Lesson 5 - Control of hazardous electricity in task-based scenarios | 38 |
ELEMENT 5.1 - Hazardous electrical safety scenarios | 39 |
ELEMENT 5.2 - Safe handling of Stored Energy: batteries and capacitors | 40 |
Lesson 6 - Training review | 42 |
ELEMENT 6.1 - Training review | 42 |
ELEMENT 6.2 - Feedback session | 42 |
9. COHE Pressure Fluid Safety Module | 45 |
9.1 Aims and Objectives of the CoHE Pressure Fluid Safety Module | 45 |
9.2 Duration of the CoHE Pressure Fluid Safety Module | 45 |
9.3 Instructor to Participant Ratio of the CoHE Pressure Fluid Safety Module | 46 |
9.4 Equipment for the CoHE Pressure Fluid Safety Module | 46 |
9.5 Timetable for the CoHE Pressure Fluid Safety Module | 46 |
9.6 Detailed Description of the Pressure Fluid Safety Module | 47 |
Lesson 1 - Introduction to the training | 47 |
ELEMENT 1.1 - Safety instructions and emergency procedures | 48 |
ELEMENT 1.2 - Facilities | 48 |
ELEMENT 1.3 - Introduction | 49 |
ELEMENT 1.4 - Scope and main learning objectives | 49 |
ELEMENT 1.5 - Ongoing assessments (participants assessment form) | 50 |
ELEMENT 1.6 - Motivation | 50 |
ELEMENT 1.7 - Human factors | 51 |
Lesson 2 - Qualified Pressure Fluids Person Requirements and Role | 53 |
ELEMENT 2.1 - Role and responsibilities of a Qualified Pressure Fluids Person | 53 |
Lesson 3 - Safe work practices with Pressure Fluids | 54 |
ELEMENT 3.1 - Pressure fluid hazards & PPE | 55 |
ELEMENT 3.2 - Work instructions | 56 |
ELEMENT 3.3 - Pre-task briefing (Also known as toolbox talks) | 57 |
ELEMENT 3.4 - Pre-use check on pressure fluid test equipment and hoses | 59 |
ELEMENT 3.5 - Test for the absence of pressure | 60 |
ELEMENT 3.6 - Safe isolation and safe dissipation of pressure in a pressure system | 60 |
ELEMENT 3.7 - Component replacement in pressure systems | 62 |
ELEMENT 3.8 - Searching for leaks in a pressurised system safely | 63 |
Lesson 4 - Response to pressure fluid incidents | 64 |
Lesson 5 - Hazardous pressure fluid scenarios | 66 |
Lesson 6 - Training Review | 67 |
ELEMENT 6.1 - Training review | 67 |
ELEMENT 6.2 - Feedback session | 68 |
Annex 1 - Equipment list | 70 |
Annex 2 - Template description for a permit to work | 73 |
Annex 3 - Version History | 77 |
Made with FlippingBook - Share PDF online