168
Mt2 Temperature Controllers Smart Series®
SMART SERIES ® Mt2
SPECIFICATIONS
CAPABILITIES
Full Color LCD Touch Screen 2” (51mm) - 176 x 200 pixels
Control Features APS (Adaptive Process System) Phase Angle, Burst Firing Infield Calibration Mode Thermocouple Slave (Manual)
User Interface Display Size Control Algorith
36cm x 39cm x 20cm (14” x 15” x 8”) Phase Angle & Burst Firing Modes (Time Proportional, Zero-Crossing)
Power Control
+/- 0.5˚C (1˚F)
Control Accuracy Display Resolution Power Response Time Temp. Resolution Temperature Scale Thermocouple Operating Range Output Voltage (Max)
T/C Auto/Man Kick-Off Wet Heater Break-out T/C Filtering
1 (˚C or ˚F)
8.3 ms at 60 Hz 1 (0°C or 0°F)
0°C or 0°F (Software Selectable) J or K-Type (Software Selectable)
Operational Features Auto/Manual Control Zone “on”, “off” Menu “Auto Save” Boost/Standby (Manual)
0 - 472°C (32 - 882°F)
264 VAC
240V Single Phase - 10’ Power Cord Included
Supply Voltage
50 - 60 Hz Automatic Switching
Frequency
5 - 450°C (41 - 113°F)
Ambient Temperature Range
Alarms Zone Alarm Configure (+) High Temperature (-) Low Temperature T/C Open (remembered % output) T/C Reversed Open Fuse Open Heater Shorted Heater/Wet Ground Fault Detection Protection Features On-Board Load Fuses On-Board T/C Fuses Soft Start Continuous Ground Fault Detection Current Measurement Overload Protection Short Circuit Protection
Equatemp ® MD-series Dual-Zone Hot Sprue Bushing
Up to 95% non-condensing
Humidity Range
40mA per Zone
Ground Fault Detection
10’ Integrated Power and T/C Cable Mt2-15SS: HB10 Double Latch Mt2-10SS: (2) CKPTF1 Split Cable 63mA Nano Fuses on Both T/C legs Semi-conductor fuses on both heater legs 15A or 10A @ 220V Fast Blow Type Closed Loop (Auto), Open Loop (Manual)
Mold Power and Thermocouple Connection
Input Protection
Overload Protection
Heater Fuses Control Modes
English, French, German, Chinese
Languages
Item No.: Mt2-15SS 15A B10 Mold End Connector
Item No.: MTPTC215 Mold Connector Uses MTC5TBG Mold Terminal Box
Item No.: Mt2-10SS 10A (2) CKPTF1 Mold End Connectors
I tem No.: MPTC210CP Adapter Cable
B10 to (2) CKPTF1 Mold End Connectors Requires controller fuse change to 10A (10 amp fuses supplied with cable)
U.S. 800-626-6653 Canada 800-387-6600 dme.net store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online